3 Star Inc 3/8S-BT 3/8" inch Bolt-Type Anchor Shackle Hot Dip Galvanized
These 3/8" inch Bolt-Type shackles can be specified for use with the Some of the 25G, 45G, 45GSR, 55G, 65G and 80/90 Torque Arm Stabilizer Assemblies, Down Guy Anchor Head Equalizer Plates and Other Torque Bar Stabil...
http://www.3starinc.com/3-8-inch-bolt-type-galvanized-shackle
3 Star Inc 3/8S-CP 3/8" inch Round Pin Anchor Shackle Hot Dip Galvanized
These 3/8" inch Round Pin shackles can be specified for use with the Some of the 25G, 45G, 45GSR, 55G, 65G and 80/90 Torque Arm Stabilizer Assemblies, Down Guy Anchor Head Equalizer Plates and Other Torque Bar Stabil...
http://www.3starinc.com/38_inch_round_pin_galvanized_shackle
3 Star Inc 3/8THH 3/8 inch Heavy Duty Open Eye Down Guy Wire Rope Thimble
For use in forming Down Guy Dead-ends with 5/16" Bare Strand and Cable Clamps or with 1/4" Preformed Dead-ends.
http://www.3starinc.com/38_inch_heavy_duty_open_eye_wire_rope_thimble_38thh
3S 3/8X6TBE&E Turnbuckle for Tower Down Guy 3/8" x 6" Eye to Eye
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Galvanized, Open Body, Working Load Limit: 1200 lbs. Ultimate Strength: 6000 lbs. The Turnbuckle eye is elongated to reduce stress on eye and make it easier for Thimb...
http://www.3starinc.com/38tbe_and_e_turnbuckle_for_rohn_tower_38_x_6_inch_eye_to_eye
3 Star Inc 3/8X6TBE&J Turnbuckle for Tower Down Guy 3/8" x 6" Eye to Jaw
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Galvanized, Open Body, Working Load Limit: 1200 lbs. Ultimate Strength: 6000 lbs. The Turnbuckle eye is elongated to reduce stress on eye and make it easier f...
http://www.3starinc.com/38tbe_and_j_turnbuckle_for_rohn_tower_38_x_6_inch_eye_to_jaw
Universal Towers 30-STRT 30 inch Face Straight Aluminum Tower Section
Made in the USA!
Is a Straight Middle or Base Aluminum Tower Section with a 30 inch Face, 10 ft in length, joins to other 30 inch Joints at Top and Bottom. Refer to Appropriate Tower Kit Package Specification Sheet to Identify C...
http://www.3starinc.com/universal-towers-30-strt-straight-aluminum-tower-section
Universal Towers 30-TAPR 30 inch Face Tapered Aluminum Tower Section
Made in the USA!
Is an Aluminum Middle or Base Tower Section with a 30 inch Face Tapered to a 26 inch Top Joint, 10 ft in length, refer to Appropriate Tower Kit Package Specification Sheet to Identify Correct Placement.
http://www.3starinc.com/universal-towers-30-tapr-tapered-aluminum-tower-section
3 Star 500' #10 Solid Copper Ground Wire
25 feet of #10 Solid Copper wire as used for common grounding applications involving Low-Voltage Communications installations like Cable TV, TV Antenna, Satellite TV and Wireless Internet. Priced and sold by in continuous roll (500 ft. per unit orde...
http://www.3starinc.com/500-ft-10-solid-copper-insulated-ground-wire
3 Star 32809 5 Foot Tripod with Antenna Mast for Sloped or Peak Roof Mount
Tripod and 1.25 inch O.D. Mast conforms to almost any Roof Peak or Slope with installer friendly front facing feet that can accomodate 16-24 inch spacing between the two outer legs leaving the center leg at half di...
http://www.3starinc.com/5_foot_tripod_with_antenna_mast_for_sloped_or_peak_roof_mount
Skywalker SKY32811 Antenna Wall Mount 4 inch W Style 3 inch Standoff Brackets for 1.00 to 2.50 inch OD Mast
The SKY32811 Antenna Mast Wall Mount Set of (2) Heavy Duty "W" Style Brackets with Hardware Included for a 3 inch Standoff Wall Support of Light to Medium Duty Antennas on Mast...
http://www.3starinc.com/3_inch_telescopic_tv_antenna_mast_wall_mount_bracket