3S-HDG-PTP-3S Heavy Duty HDG Alligator Mast Pole Jaw Clamp Set of 2 for Pipe 1.50" to 2" OD
Made in the USA!
The 3S-HDG-PTP-3S Heavy Duty Pole Mast Mount Clamp Jaws can hold Mast Tubing from 1.50" OD to 2" OD. No Hardware or complete clamping solution included.
Includes 2 - H...
http://www.3starinc.com/heavy_duty_pole_mast_clamp_jaws_medium
3S-HDG-PTP-4S Heavy Duty HDG Alligator Mast Pole Jaw Clamp Set of 2 for Pipe 1.25" to 3" OD
Made in the USA!
The 3S-HDG-PTP-4S Heavy Duty Pole Mast Mount Jaw Clamps can hold Mast Tubing from 1.25" OD to 3" OD. No Hardware or complete clamping solution included.
Includes 2 - HD...
http://www.3starinc.com/heavy-duty-hdg-alligator-clamp-for-pipe-1-25-4-od
3 Star Inc 3S-HMK Hardware Mounting Kit for Antenna Wall Mount Bracket Assemblies
Made in the USA!
The 3S-HMK Hardware Mounting Kit is comprised of (2) 2.5" x 2.5" x 36" inch Angle Brackets for backplates with (4) 1/2" x 18" inch long Threaded Rods, Nuts and Lock Washe...
http://www.3starinc.com/pwm-hardware-mounting-kit-for-antenna-wall-mount-bracket-assemblies
3 Star JRM20010 Non-Penetrating Roof Antenna Mount 2.00 in. x 10 ft. Mast
Made in the USA!
Mast Dimensions - 2“ Galvanized Pipe (2.00" O.D.) x 120”
The ROHN JRM is a non-penetrating, 5' square ballast type roof mount that supports a 10' Mast Pipe with up to 12 standard co...
http://www.3starinc.com/3-star-jrm20010-non-penetrating-roof-antenna-mount-200-in-x-10-ft-mast
3 Star Inc 3S-MAT 1/8 inch Rubber Protective Mat for Non-Penetrating Roof Antenna Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 1/8 thick Mat measures roughly 54 wide by 54 inches long, trims neatly, place underneath Frame of No...
http://www.3starinc.com/protective_roof_mat_for_non-penetrating_antenna_mounts
3S--MCP Galvanized C-Clamp 1/2" x 2-00" x 11-5/8"
Galvanized C-Clamp half is used in many kits , Hot Dipped Galvanized ....
http://www.3starinc.com/3s-mcp-galvanized-c-clamp-half
3S-MD-CL Heavy Duty Medium Mast Clamp and Round U Bolt
The Pole to Pole Mounts is designed to support most WiFi , PCS, Cellular, and TV antennas. The Pole to Pole Mounts allows you to vary the mounting pipe length and diameter, It is Pre- galvanized for corrosion protecti...
http://www.3starinc.com/heavy-duty-medium-mast-clamp-and-round-u-bolt
3 Star Inc NP-GWKIT 6/20 Down Guy Wire Kit For Non-Penetrating Mount Antenna Mast up to 2-1/4" OD
Made in the USA!
Complete kit for guying down a mast on a Non-Penetrating Mount up to 2.25" diameter. Includes guy wire, guy ring, S hooks, turnbuckles and cable clamps. Rebar Stakes with eye loo...
http://www.3starinc.com/non-pen-and-tripod-mount-guy-wire-kit-for-2-25-mast
3 Star Inc 3S-PAD 3/8 inch Rubber Protective Pad for Non-Penetrating Roof Antenna Mount
A Protective 24" x 72" Layer that you can Custom Cut to place between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 Thick Pad is for placement underneath the Frame o...
http://www.3starinc.com/protective-barrier-pad-for-non-pen-roof-mount
EZ-PNP Non-penetrating Satellite Dish Pitched Roof Mount
Made in the USA!
is constructed of Pre-Galvanized Steel and uses standard concrete blocks with a 9 inch by 6 inch Foot Plate. This Particular Model can Accommodate a wider Range of Foot-Plates...
http://www.3starinc.com/non-penetrating_dbs_dss_pitched_roof_mount
