Universal Towers 18-TOP 18 inch Face Aluminum Top Cap Tower Section Made in the USA! An 18 inch Aluminum Tower Top Cap Section, 10 ft in length and ordered with your choice between a 2.00, 1.625 or 1.25 inch Collar with Mounting Plate for Installation of a Thrust Bearing or a Beacon Mounting Plate...

SCP 18/2FPLP-SH 2C/18AWG SBC SHIELDED FPLP RED PVC - 1000 FT Spool Power limited shielded Plenum rated fire alarm and communications cable for Air handling Plenum and Riser applications. Fire Alarm, Fire Protective Circuits, Smoke Detectors, Monitor/Detection, Signal, Control Circuits, Initiating C...

SCP 18/4FPLP-SH 4C/18AWG SBC SHIELDED FPLP RED PVC - 1000 FT Spool Power limited shielded Plenum rated fire alarm and communications cable for Air handling Plenum and Riser applications. Fire Alarm, Fire Protective Circuits, Smoke Detectors, Monitor/Detection, Signal, Control Circuits, Initiating C...

ROHN 1LG 1.25" inch OD 16 GA "J" Pipe Universal Antenna Mast Roof and Wall Mount Made in the USA! The Universal One-Legged Mount (1LG) may be the one and only mount that can be installed on any part of any building. This mount is designed for many types of antennas – Home, TV,...

3 Star Inc 1S-BT 1" inch Bolt-Type Anchor Shackle Hot Dip Galvanized These 1" inch Bolt-Type shackles can be specified for use with the Some of the 25G, 45G, 45GSR, 55G, 65G and 80/90 Torque Arm Stabilizer Assemblies, Down Guy Anchor Head Equalizer Plates and Other Torque Bar Stabilizer A...

ROHN 20BG 3' foot 25G Short Top Cap Section with 2.00" OD Mast Tube can Ship UPS Package This ROHN 20BG Short Top Cap Section for a 25G Tower is 37 inches high and consists of 16 gauge walls with a 2.00" OD Mast Tube protruding 8.25 inches above apex of side rails at the Pinnacle of t...

Universal Towers 21-30 Standard Duty 30' Foot Freestanding Aluminum Tower Kit Made in the USA! The Universal Towers 21-30 is a (3) Section, 30' Foot Tower with Optional Embedded Concrete Anchor Base or Flat Roof Mount. This Tower is designed for 21.0 to 11.5 Square Foot of Wind Load depend...

Universal Towers 21-40 Standard Duty 40' Foot Freestanding Aluminum Tower Kit Made in the USA! The Universal Towers 21-40 is a (4) Section, 40' Foot Tower with Optional Embedded Concrete Anchor Base or Flat Roof Mount. This Tower is designed for 21.0 to 11.5 Square Foot of Wind Load depend...

Universal Towers 22-STRT 22 inch Face Straight Aluminum Tower Section Made in the USA! Is a Straight Middle or Base Aluminum Tower Section with a 22 inch Face, 10 ft in length, joins to other 22 inch Joints at Top and Bottom. Refer to Appropriate Tower Kit Package Specification Sheet to Identify C...

Universal Towers 22-TAPR 22 inch Face Tapered Aluminum Tower Section Made in the USA! Is an Aluminum Middle or Base Tower Section with a 22 inch Face Tapered to an 18 inch Top Joint, 10 ft in length, refer to Appropriate Tower Kit Package Specification Sheet to Identify Correct Placement.