Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
ProductQtyPrice
VHF/UHF/FM...1$28.51
Goods Total1$28.51
View Cart Check out
Printer View Tell a Friend

VHF/UHF/FM 25dB Variable Gain TV antenna amplifier

× VHF/UHF/FM 25dB Variable Gain TV antenna amplifier was added to your Shopping Cart.
Price$28.51
Manufacturer CodeSKY38323
Qty
AvailabilityUsually ships in 24 Hrs

Highlights
  • Bandwidth: 47-1000MHz
  • Maximum Input: VHF: 40dBmV / UHF: 20dBmV 
  • Adjustable Gain: VHF: 25dB UHF: 21dB
  • Noise Figure: VHF: 6dB UHF: 8dB
  • Gain Control: 10dB
  • Power Consumption: approximately 2.4W
  • Power Requirements: 117VAC 60Hz or 220VAC
  • Heavy Metal Housing
  • Power indicator Light

Bulk Quantities Available Here!

Skywalker's Signature Series 25dB Amplifier VHF/UHF/FM with variable gain

 

Too much gain can be just as bad, as not enough. With this three band amplifier you have the ability to make your gain adjustments just right. With an adjustable gain control, giving you up to 25dB of gain in the VHF, 22dB in the UHF and 18dB in the FM Band!

This Signature Series 25dB Amplifier is powered by 120 volt mains AC that easily plugs into any standard outlet. All cable connections are the standard F type. This amp also features an on/off light to take the guess work out of it's current operational status. That's not all, it's tough on noise and interference because of its heavy metal housing and solid construction.

 

Bandwidth 47-1000MHz
Maximum Input VHF 40dB MV / UHF 20dB MV
Gain VHF 25dB / UHF 21dB
Gain  
54-300Mhz 25dB
300-806Mhz 22dB
900Mhz 18dB
Noise Figure VHF 6dB / UHF 8dB
Gain Control 10dB
Power Consumption approximately 2.4 watts
Power Requirements 117VAC 60Hz or 220VAC
Main Housing Dimensions 5.5in L x 3.25in W x 1.5in H
End Mount Tab to End Mount Tab 6.75in
Height from bottom of housing to top of "F" connectors 2in
 

 

 

 

 


 

 
Note

If you are adding a couple HD Ready TV sets to your TV Antenna Hook-up, this amp will will work fine to offset any loss that is encountered when adding a splitter to feed the additional Outlets. In addition, it comes with an adjustable Gain control, so you can find that sweet spot. Then when you add more loss to the system you have some gain for future additions and a signal Splitter, or balance the amplifier out to feed another amp at the other end of a cable segment to extend your systems reach to another building. It is Forward only (54-1000 MHz), which matches the Bandwidth of any TV Antenna System, however it will not pass any return signals from internet cable modems or Pay Per View Converter Boxes.

Check Your Picture quality where the Cable TV feed enters your Home, if it's good there, you can replace connectors, cable and Splitter to bring your installation up to the newest specifications. If you are feeding numerous TV sets or long Distances, use this Amplifier before the Splitter Or long cable run to maintain Signal Quality.
Rate this product.
Product isn't rated yet. Write a review.

Products   Recently Viewed