Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

Structured Network Cable Wiring Blank Mounting Panel 6x7

Price$11.64
Manufacturer CodeUMB-4
Qty
AvailabilityUsually ships in 24 Hrs
ShippingCan ship Canada

Highlights
Allows mounting of Custom Components.
Fits most structured wiring panels
Dimensions: 6-1/4in x 7in x 1/2in

Bulk Quantities Available Here!

SCP UMB-4 Structured Network Cable Wiring Blank Mounting Panel 6x7
Allows Customization of your Structured Wiring Panels by providing a Universal back plane/board to mount Components not initially designed for inclusion in a Structured Wiring solution. Dimensions are 6-1/4in x 7in x 1/2in. Slotted channels provide near Universality in accomodating a pre-drilled screw hole solution for the equipment to be mounted.
Rate this product.
Product isn't rated yet. Write a review.

Though Structured Cable Products and Home Network Wiring is Bundled Together for Economy in Space and Ease of Installation, the Component Cables and Wires should still be treated as Individual with the Systems to which they belong as compared to the Whole. No One System should be Sacrificed to serve the Needs of Another. When Preparing Terminations, Leave Plenty of Tail before Prep, and Plenty of Spare to Coil after. This will Serve Future Expansion Well. Most Manufacturers know the limitations of the Individual Wires and Cables their are Bundling, Make Sure you do too. It is Especially Important to Approach Installation as the Most Fragile of Companents as the Major Consideration. Do not Force the Issue, If It doesn't fit, Be patient enough to Figure a Work-Around. A properly prepared Communications PVC Conduit route involves sweeps, not 90 Degree bends, and as few as possible. The size of the conduit should be 4 times that to be occupied. Install with MuleTape already inside for ease of pull-through. Do not under any circumstances colocate communications circuits with power. Even in Conduit, power circuits and routings should be crossed at 90 angles of intersect as to avoid field induction. If your routing has to be parallel, consider 2 feet to be minimum distance if either is shielded, 4 to 6 feet if not. Comm circuits should avoid flourescent lighting at all costs... The fields generated from the ballast transformer and even the bulb will wreak havoc on todays micro-circuits.

There are Panel Box Systems made for central inter-connection of Video, Telco, Internet and Intercom. Regardless of manufacture, they are pretty much standardized in the block-out of space inside, and the installation of the Modular blocks of Termination and patching. Again, AC power for the systems should remain outside the panel, with either the transformers plugged into the outlet and DC running through the bulhead inside the Panel, or the standard AC plug running through a bulk-head to the outlet outside the Panel.