Universal Towers 12-40 Standard Duty 40 ft Aluminum Tower Kit
Universal Towers
Made in the USA!
Is a (4) Section Tower with Embedded Concrete or Flat Roof Mount Base (Optional). This tower is designed for 12.0 to 5.5 Square Foot of Wind Load depending on Wind Speed Design of 80, 100 or 110 MPH rating and appurtenances added to Kit Package ordered. Available with a 2.00, 1.25, 1.625 inch Collar at Top of Pinnacle or a Beacon Mounting Plate on a Straight Top Section in Optional Substitution.
Universal Towers are made with rugged, Heavy Wall Aluminum tubing legs and welded S-Bracing for strength as well as light weight.
KIT INCLUDES:
B-22 Base Anchor (Optional)
RFM-22 Flat Roof Mount (Optional)
(1) 22-TAPR - Tapered Bottom Section
(1) 18-STRT - Straight Middle Section
(1) 18-TAPR - Tapered Middle Section
(1) 14-TOP --- Top Pinnacle Section
Various Bolt Kits
Rebar may not be needed; depending on Soil, Weather and Seismic Conditions. The Tower is Lightweight, and the Foundation is large enough to support most Tip-over Moments. Accordingly, #6 rebar can be used in concrete reinforcement applications. Consult your Local Structural Engineering Firm.
Packages typically include a mast collar for a 1-1/4 in. OD mast with a welded bearing mount top plate designed for UV-TB158 and UV-TB2316 thrust bearings, sold separately. Packages are available with other mast collar sizes (Select Optional Pipe Collar Size on Checkout). Orders without bearing top plate are also available, by request. A variety of optional Rotator Plates are listed in the Accessories Category. Chose yours to fit the top section of the tower package selected; R-11, R-14 or R-18. Each is available un-drilled or pre-drilled for popular rotator models. Find Universal Towers Aluminum Masts in various lengths and sizes in the same Category.
A Tower Assembly Top Beacon Plate can now be selected for Mounting Beacon Lighting, Meteorological Test and Telemetry Antennas, Cameras, WIFI Antennas, WISP, Wireless Internet and Cell Service Repeaters. The Universal Towers BP-11 Assembly Plate Top Beacon Plate fits on top of 11-TOP, 14-TOP and 18-TOP on the regular Main Tower Sections. Hardware to Bolt to a Main Section is Included, absent is the Beacon Mounting Hardware which should be sourced with purchase of the Beacon itself.
Download
Pre-Galvanized & Hot Dipped Galvanized Steel Pipe
Pre-Galvanized & Hot Dipped Galvanized Steel Pipe ,offers to meet a variety of communication tower needs such as Cellular, PCS, Wireless Cable, Microwave, Wireless Internet, WiFi Hot Spots, DBS, MDS, MMDS and UHF/VHF reception. Galvanization provides a protective zinc coating that prevents rust and corrosion from water or moisture over time .
Selecting Antenna Mast Pipe?
Selecting the proper antenna mast pipe is crucial. Depending on the size of your antenna, it's EPA, weight and height all play a factor in selecting a supportive pole. When planning, it's best to have all the information you can get like outside diameter of your attaching method, the clearance of gutters, siding or other obstacles in the path of your erecting a mast or tower.
Here you will find standard straight pipe in 5' foot and 10' foot lengths. You can also find those same pipes with a special end called a swag. A swaged ended pipe allows you to attach several lengths of pipe together.
| Swaged End | Straight End |
 |
 |
When selecting a pipe you will need to know the length, OD (outside diameter), the AWG 16 or 18 (the smaller the number the thicker the steel) and weather you'll need any swaged ended pieces. You'll then need to select the proper mounting such as wall, roof or maybe a tripod.
Sorry, we are offline,
click here to send us message
