5/8TBE&E Turnbuckle for Tower 5/8 x 12 inch Eye to Eye

5/8 x 12 inch Eye to Eye Turnbuckle 5/8TBE&E

View Larger Image

Price$18.95

Manufacturer Code5/8X12TBE&E

Qty

Add to Cart View Cart Shipping Calculator

AvailabilityUsually ships in 24 Hrs

ShippingCan ship Canada

Highlights

Heavy Duty
3500 lbs Working Load Limit
17,500 lbs. ultimate Strength

5/8TBE&E 5/8 x 12 inch Eye to Eye Turnbuckle

Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs.

Spec. Sheet

Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH, 5/16" Strand via Pre-formed deadend and 7/16THH or 5/16" Bare Strand via Cable Clamps and 3/8THH, 3/8" Strand via Pre-formed deadend and 1/2THH or 3/8" Bare Strand via Cable Clamps and 7/16THH) to Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343). 17,500 lbs. Ultimate Strength. Eye to Eye Turnbuckles typically attach the Tower Down Guy Strand (via a Big Grip Pre-Formed Dead-End and a Heavy Open Thimble) on one end to the Down Guy Equalizing Plate (the ones that use Bolts as the attachment Method, ie; R-GAC303 and R-GAC305) attached the Anchor on the other end. Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.
Compare to ROHN R-5/8TBE&E 5/8 inch Eye to Eye Turnbuckle!

Rate this product.

Product isn't rated yet. Write a review.

TURNBUCKLES / CLEVICES / STRANDVICE

Hot Dipped Galvanized is used to adjust the tension on Guyed Towers