Your Cart

Product	Qty	Price
ROHN 25G Complete...	1	$4,275.00
HOLLAND 12...	2	$2.65
3x Cat6 + RG6/U...	1	$439.95
ROHN 65G Section...	1	$84.95
ROHN 65G Tower...	1	$734.00
Coaxial Cable...	1	$1.95
EZ32A Telescopic...	3	$21.95
ROHN 65G Tower...	1	$425.00
ROHN 25G Tower...	3	$289.00
50 FT RG11...	2	$35.00
EZ32 Telescopic...	2	$14.95
Thomas & Betts...	1	$1.30
40 Foot Telescopic...	1	$240.00
3 inch wall...	1	$12.95
ROHN 25G Swaged...	1	$64.00
RG11 QUAD Shield...	1	$89.95
ROHN 24 inch...	2	$88.00
Push on F Connector...	1	$0.79
ROHN 25G 20...	1	$540.00
6 inch TV Antenna...	1	$10.82
Telescopic...	10	$144.00
225 FT RG11...	2	$99.00
Single Port...	2	$0.95
ROHN 55FK 60...	1	$9,610.00
ROHN 25G 45G...	1	$316.00
ROHN 25G Tower...	1	$1,985.00
4 inch Heavy...	3	$11.95
EZ19B Roof...	3	$18.08
EZ32C Telescopic...	3	$24.95
Telescopic...	5	$117.00
ROHN 25G Tower...	1	$290.00
Holland HPF...	1	$2.45
5/16 inch Heavy...	1	$1.65
18 inch Telescopic...	1	$28.40
ROHN EP25343...	1	$86.00
40 Foot Telescopic...	1	$309.00
5' Foot X 1...	2	$16.00
24 inch Telescopic...	2	$34.75
ROHN 25AG 45AG...	1	$49.00
ROHN 55G Tower...	1	$298.00
ROHN H40 Telescopi...	5	$163.00
ROHN 65G 20...	1	$1,668.00
ROHN 25G 10...	2	$334.00
Complete Grounding...	1	$32.00
3 Foot Roof...	1	$54.00
ROHN Tower...	1	$21.00
ROHN 65g Top...	1	$319.95
30 inch Telescopic...	1	$24.95
ROHN Universal...	2	$70.38
ROHN 25G Antenna...	1	$415.00
75 FT RG11...	2	$45.00
RG6 Coaxial...	1	$3.95
Rohn RSL Tower...	1	$3,710.00
Rohn RSWGB...	3	$260.00
12 inch Telescopic...	1	$23.50
ROHN RSL 100...	2	$6,636.00
Telescopic...	10	$78.00
ROHN Lightning...	1	$145.00
ROHN 12 inch...	3	$84.00
3/8 X 4 Foot...	1	$16.00
50 Foot Telescopic...	2	$282.00
Rohn RSL Tower...	2	$592.00
Rohn RSL Tower...	3	$625.00
ROHN 25G Complete...	1	$4,480.00
24 inch Deluxe...	1	$34.95
ROHN 65G 10...	1	$1,695.00
Rohn RSL Tower...	1	$1,150.00
RASK12 Accessory...	1	$296.00
LNS5000 Big...	1	$67.95
Rohn RSL Tower...	2	$156.00
Digital Broadband...	1	$29.95
Rohn RSL Tower...	1	$372.00
ROHN 25G 35...	1	$897.00
125 FT RG11...	1	$59.00
ROHN 45G Tower...	1	$275.00
12 inch Deluxe...	1	$19.95
ROHN H50 Telescopi...	5	$189.00
ROHN 18 inch...	1	$86.00
Six Port Keystone...	1	$1.05
ROHN 45G 55G...	1	$156.00
5' Foot by...	1	$14.50
RG11 RG7 RG6...	1	$24.95
ROHN TUF TUG...	1	$325.00
CAT6 Direct...	1	$249.95
RG6 Underground...	1	$62.00
Rohn RSL Tower...	1	$196.00
ROHN TUF TUG...	1	$335.00
ROHN 25G Tower...	1	$101.00
ROHN 25G 90...	1	$2,475.00
Goods Total	150	$65,115.91
View Cart Check out

4 inch Heavy Duty Antenna Mast Wall Mount Bracket

Telescopic TV Antenna Mast Heavy Duty 3" Wall Mount Bracket

View Larger Image

Price$11.95

Manufacturer Code32812

Qty

Add to Cart View Cart Check out Shipping Calculator

AvailabilityUsually ships in 24 Hrs

ShippingCan ship Canada

Highlights

Pre-Galvanized Finish
Heavy Duty Steel
From 1 to 2.25 inch DIA
Lag Bolt Hardware included
Wall Mount for:
ROHN H20, H30, H40, H50 and
Channel Master 1620, 1630, 1640, 1650
1820, 1830, 1840, 1850

SKY 32812 Heavy Duty Antenna Mast 4 inch Wall Mount Bracket
is designed to provide supplemental Wall Mount Support for ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast like the CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S, 3S-5999 and 3S-5994 from 1 to 2.25 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware. Guy Wire Support for Mast Sections 10 Feet and greater above this mount will still be required. Adjustable for Clamping Any Antenna Masts from 1 to 2.25 inches in Diameter. This Bracket will Stand off any Antenna Mast within this Diameter range, but is not designed to support the weight of any Telescopic Antenna Mast off of the Ground. Guy Wire Support for Mast Sections above this mount will still be required. Bonding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance (Set of 2 brackets includes 2 inch Lag Bolt Hardware).

This "W" Wall Mount Bracket is Designed to Support Antenna Masts from 1 to 2.25 inches in Diameter with 4 inches of clearance from the Wall. This Bracket will provide support for ROHN H20, H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescoping Masts, but not the weight of a Telescopic Antenna Mast off of the Ground. Set Screw installation may require pilot hole drilling of both Mast and Bracket. If you are Installing 2 inch or greater diameter masts or any mast greater than 10 feet in height, run the Mast length all the way to the Ground, resting the weight on a Mast Ground Plate and affix an Earth Ground there with a 5/8 inch diameter, 8 foot long Ground Rod as a minimum. Use a Ground Plate like EZ32A or GTMBL to mount the Bottom of a Telescopic Antenna Mast from the ground up, with the Wall Bracket maintaining vertical alignment and clearance from the Wall. Affix an Earth Ground to the Mast and Ground Plate with a 5/8 inch diameter, 8 foot long Ground Rod as a minimum.. These Mounts do not replace or otherwize reduce the need for proper guying of the Telescopic Antenna Masts.

Specification Sheet

Quick Specs

Download

EZ46-3PO Pitch Pad Moisture Barrier Kit - $1.90

Add to Cart

Rate this product.

Average Customer Rating:

based on 1 reviews. Write a review.

13 May 2017, 2:55 PM

Aaron (Guest)

Good quality wall mount bracket.

Worked excatly like I expected it to.

See all customer reviews..

Wall & Eave Mount Brackets

Wall & Eave Mount Brackets for Satellite TV Antenna Mast, Cellular Wireless Internet, Business Band and Telescopic Antenna MastsIt is Important to choose an Antenna Mount and Wall Mounting Location with a Picture of the Finished Antenna Installation in Mind. Be Sure to First select a location that lends itself to applying a Vertical, Cantilevered, Twisting Load without Compromising the Integrity of the Wall Material you affix to. Most Modern Exterior Decorative Wall Finishes most often do not have the Strength to Hold the Weight and Pressure of a Large TV Antenna under Wind Load without fail. Beams and Studs within the Wall are an Absolute Must to Locate when the Wall Composition is anything other than Solid wood or Concrete. Attach to these Strength Members. Further, Think about what's underneath the Wall exterior. Is it stronger, will it yield to Pressure over time as well? Sandwich additional Material (wood or steel) to the backside or both sides of the wall at the points where the mount attaches, as to distribute the load on relatively weak wall materials and to dampen vibration from Wind. Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification. Further, the NEC (National Electrical Code partly defines a good Ground connection as being as short as possible, you must affix a connection to a good Earth Ground prior to Premise entry or Bond to an existing one.