Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

EZ NP-30-166 Non-Penetrating Low Profile 1.66" OD x 30 in. Dish Antenna Mast

Price$94.95
Manufacturer CodeEZ NP-30-166
Qty
AvailabilityUsually ships in 24 Hrs

Highlights

1.66" OD Mast with up to 5' Height
Off-Air Antennas
Wireless Antennas
FRM 12 ga Base Mount
Comes with Hardware

Bulk Quantities Available Here!

3 Star Inc. EZ NP-30-166 Non-Penetrating Low Profile 1.66" OD x 30 in. Dish Antenna Mast
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV, Satellite Dish and Wireless Internet Antenna mounting, is constructed of pre-galvanized steel, uses 6 standard concrete blocks as Ballast, 28.5 x 35.5" base.


This size mast is a Standard for simple, single Satellite TVRO (TV Reception Only) and DBS (Direct Broadcast Satellite) Dishes less than 1.5 sq. ft. in Surface area. Most TV and Radio Reception antennas have U-bolt mounting that can accommodate up to this diameter as well. This is akin to most "J Pipe" Eave mounts for similar purposes. Non-Penetrating Roof Mounts can be utilized within various weight restrictions depending on the Structural Composition of your flat roof, and when set up on a Rubber Mat or Pad, will protect surfaces such as Shingle and Tar, Pea gravel, Membrane and bare concrete without puncturing or marring and help distribute the weight evenly.

*Redesign Improvement from Legacy "RT" to New "RTL" Towers*

The "RT" Series Tower Sections had cross bracing segments that spanned from one Tower Section to the next.
The "RTL" Series Towers Sections feature cross bracing that starts,stops and is totally contained within the same Tower section; making it easier to assemble a complete tower section on the ground for lifting and easier attachment/fitting to the next Tower Section during erection.

Rohn RTL Light Series Standard Design Tower Kits
Ordering Notes

Things to keep in mind when ordering a Rohn RT Tower Kit:

Items That ARE Included

  1. Step bolts on ONE TOWER LEG are provided for the full height of the tower.
  2. The RTL Tower kits are supplied with pal nuts as nut-locking devices. Alternative nut-locking devices can be substituted by indicating the type you would like in the order notes when checking out. The available nut-locking devices are: Split-Ring Lock Washers, Anco Nuts and Tri-Loc Nuts.

Optional Items That ARE NOT Included

  1. Anchor rod kits. For your convenience, Anchor Rod kits appear as optional selections provided to you when adding a tower kit to your cart. Options include a full tower base template with anchor rod clusters or an anchor rod cluster kit that includes the anchor rods and a top and bottom template for each tower leg.
  2. Accessories like grounding kits, lightning rods, mounts, WIG ladders or brackets, etc. are not included
  3. The Safety Climb System is ordered separately.
  4. Contact us if you require any assistance in determining the adequacy of a specific RTL tower kit for site-specific applications.
Design Notes
  1. The ROHN Standard Light, Medium and Heavy Series RTL towers are based on the wind, ice and earthquake requirements of the ANSI/TIA/222-H Standard.
  2. The suitability of a ROHN standard RTL tower kit and standard foundation for a specific application must be verified by the purchaser based on site-specific data in accordance with the ANSI/TIA-222-H Standard. All users are solely responsible for the installation, use, maintenance, inspection and other work and the compliance with all local, state and federal requirements.
  3. The allowable Effective Projected Areas (EPA) tabulated represent the summation of the projected areas of all antennas, mounts, and accessories multiplied by appropriate drag factors and are assumed to be symmetrically mounted on the tower. Eccentric loading may increase member forces and may require a reduction of the tabulated EPA values.
  4. The tabulated EPA values apply to towers installed at ground level. Lower EPA values than tabulated may apply for roof mounted towers or for towers located on sites with unusual terrain.
  5. The EPA values are determined for ANSI/TIA-222 Topographic 1 tower site conditions (no abrupt changes in general topography) surrounded by Exposure C terrain (open unobstructed areas). For the Light Series towers, higher EPA values are provided for tower sites surrounded by Exposure B terrain (urban, suburban or wooded areas). Lower EPA values would apply for tower sites exposed to Exposure D terrain (open water or smooth unobstructed areas).