EZ17 Roof Base Mount for Telescopic Antenna Mast
EZ EZ 17 Economy Roof Mount
Made in the USA!
Fits masts up to 1-3/8" tubing. 18 gauge foot with an 18 gauge tube. Often called peak mount. Zinc plated. This foot is smaller than our 19 series. Made in America.
Specifications:
Accepts Mast To: 1.3/8 in
Tubing Size: 1.375 in
Weight: 1.1 lb
We are so Happy to have This Universal Peak Ridge and Flat Roof Mount for Telescopic Push-up Antenna Masts for masts up to 2-5/8" Diameter (which is every Brand and Model we can think of) Of all the Models we've evaluated to date, this one is the Best. It starts with a 16 gauge shaped, rolled, seamed Tube stock that has a recessed channel for the inside set of retaining set screw nuts. All of the Hardware is Galvanized and is of a Heavy Duty Nature. The Hinges are also 16 gauge and Hardy Stuff. Matter of Fact, this Mount will be Harder than most Masts, you will probably want to procure a 6 inch section of Black Iron Pipe to place on the inside of the bottom section of the antenna Mast to keep it from Collapsing, as the Double Nut Set Screws do not give. The Bottom Main Assembly Bolt also doubles as the 3rd Hinge which facilitates swinging the Mast up or down from Vertical for Erection and Maintenance. As with all Masts, Guy wire support and Grounding are Critical to Antenna Survival.
Antenna Mast Roof Mounts
There is no substitute of height, clear line-of-site and size does matter... The higher the frequency, the higher the loss... Amplifiers do not give you something that you didn't have already...
The first key to any reception is to get above obstructions that exist between you and your target, as radio frequency reception of any kind (satellite, microwave, Radio and TV) are for the most part "Line-of-Sight" dependant. The fact that some receptions occur without line of sight is due to phenomenon not applicable in this discussion. As you increase your target distance, you increase the territory you must account for in maintaining line-of-sight.
What tall building and air traffic exist in this corridor, no one can account for. Aircraft are very good at messing up reception for a number of reasons, even when flying way above the path, again removed for clarity in this discussion. Height, is therefore key in optimizing your ability to capture the best line-of-sight possible to your target.The Roof of any Building of Home provides a Logical Platform of Height in which Line-of-Sight is more likely to occur, or from which, more height can easily be obtained.
These Mounts are Quality made by Manufacturers with a History in the Field of Proven Success and Longevity. Whether you are planning to Install your Antenna and Mount to the Roof Peak, Gable, Vent Pipe, Chimney or Pitch, Please plan your installation to Minimize the Structural and Asthetic Impact to your House or Building, research and follow all applicable Local Building Codes and annex the appropriate Structural Engineering Assistance when utilizing Non-Penetrating Mounts with Concrete Cinder Block Ballast on any Flat or Pitched Roof.
Sorry, we are offline,
click here to send us message
