HDMI Signal Extender For Long Runs Using Two (2) Cat5E/Cat6 Cables
SCP
The SCP 946 HDMI Long Run CAT5e/CAT6 Extender Set uses two (2) CAT5e/6 cables as the transmission media. This enables easy HDMI installation over a long distance (up to 165ft/50m).
VGA : 640x480,800x600,1024x768,1280x1024
DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080P
Output Video: HDMI+HDCP1.0/1.1
Operating temperature range: -5 to +35C (-41 to +95F)
Operating humidity range: 5 to 90 % RH (no condensation)
Signaling rates: 2.25Gbits x 3
Input Video Signal: 0.5-1.0 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Transmission distance: 50M
Power Consumption: 120 m Watts (max.)
Download
HDMI Extenders
The length of a HDMI cable is fixed and unchangeable after is produced. The HDMI connector can only be soldered or terminated by a professional worker in a factory environment. The user can not reduce or increase the size by themselves if there was need for it... However!
Effortlessly extend the reach of your HDMI or DVI (DVI... as in your Computer Video Monitor Cable!) cable link from 165, up to 328 feet between the source and destination HDMI equipment such as digital entertainment centers, HDTV, retail setups, show/convention sites, HDTV, STB, DVD, Projector factories, data center control, information distribution centers, conference room presentations, school and corporate training environments through the use of CAT5e, CAT6 or RG coaxial Cables. The Variety of Extenders showcased in this Category may use one or several cables of the aforementioned variety to extend extend the HDMI signal even farther. These are typically "Plug-n-Play" modules that are Auto-adjusting in compensation for signal strength and cable length.
Sorry, we are offline,
click here to send us message
