Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

Non-Penetrating Roof Mount Hardware only For Masts 1" to 2.25"

Price$84.00
Manufacturer Code3S-FRM-HDW
Qty
AvailabilityUsually ships in 24 Hrs
ShippingCan ship Canada

Highlights

FRM BASE Only

Mast not included 

Accepts Mast Pipe 1" to 2.25: OD

Off-Air Antennas
Wireless Antennas
Comes with Hardware

 

Bulk Quantities Available Here!

   3S-FRM-125 Non-Penetrating Roof Mount  Hardware for masts 1" x 2.25" 


Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 ga. steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Hardware only accepts masts up to 2.25" OD


SHOWN WITH OPTIONAL MAST NOT INCLUDED


 

Height and Antenna Loading capability are dependent upon ballast weight... You need to Consult an Engineer to determine the Load Bearing Capability of the roof that you are entertaining such an Installation. It is Important to choose a Mount and Mounting Location with a Picture of the Finished Installation in Mind. Be Sure to First select a location that lends itself to applying a Load without Compromising the Integrity of the Material you affix to. Most Decorative Finishes most often do not have the Strength to Hold a Weight or Pressure without fail. Further, Think about what's underneath the exterior. Is it stronger, or will it yield to Pressure over time also? Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied in cantilever also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification.

Buyers Guide
Install Guide
Rate this product.
Product isn't rated yet. Write a review.