Print this pagePrint this page

In-Line Cable Power Supply Kit for Satellite , CableTV and Antenna


In-Line Cable Power Supply Kit for Satellite , CableTV and Antenna
Price: $32.95

Options:
In-Line Amplifier50Mhz to 2150Mhz In-Line Amplifier; 950Mhz to 2150Mhz In-Line Amplifier
Highlights:

Line Powering
Directional 
IN:  115-240V VAC
OUT:12 VDC 0.3A


Availability: Discontinued
Shipping: Can ship Canada
Weight: 0.5 lb
Description

LA-KIT DC IN-Line Power Supply for Cable TV Antenna and Satellite TV Amplifiers


The LA-KIT is an optional UL listed (Indoor Use) DC Voltage Power Supply for powering an In-Line Amplifier (up to 2.2 GHz) farther upstream on the same coaxial cable, for the LA Series In-Line Amplifiers or other DC line powered (Pre-)Amplifiers. This is a Power Supply Kit takes 115 VAC input to supply 15 VDC @ 100 mA onto the line through the Power Inserter that passes the 5-2150 MHz (2.2 GHz) Bandwidth normally associated with Cable TV, TV Antenna and Satellite TV use. One Port Power Passive (passes DC Voltage in one direction only). The connection can be safely extended to another inserter installed outdoors by coupling an RG cable to the RF/DC OUT side of this inserter, and then running the RG cable to connect into the DC IN Port of the second Inserter.

 

Kit Includes :
1 x Power Supply 
1 x In-Line Amplifier: 50Mhz to 2150Mhz In-Line Amplifier (Optional Choice)

1 x In-Line Amplifier: 50Mhz to 2150Mhz In-Line Amplifier ( Optional Choice)
1 x Power Inserter: Power Inserter 5-2150Mhz:

 

 



Note:

When Splitting the High Frequencies of Satellite TV Services to feed multiple Receivers, the Loss associated with the splitter may need to be compensated for with the use of an In-Line Satellite TV Drop Amplifier (Signal Booster) specific to this purpose and Frequency Range. Consider the need and review the "Satellite TV Amplifier" category for selection. Most of these Satellite In-Line Amplifiers are line powered from the Satellite Receiver and will not, under most circumstances, require any externally coupled supply that this is intended to couple. If the receiver doesn't inject DC power for use by LNB(F)'s, or the segment of cable you need to amplify doesn't have DC Voltage on the line at that point, and you need to install an In-Line Amplifier there, this is the means to get power on that line!

This Power Inserter will pass Frequencies also associated with Cable TV and TV Antenna use. TV Antenna Pre-Amps usually include a Power Supply and Inserter, if you need an Inserter/Power Supply Combo for this purpose, this one will do... Most In-Line Cable TV amplifiers also come with the aforementioned accessories, but if you are missing them, this Inserter/Power Supply Combo will also fit the Bill...

Also, if you need to block the DC voltage from passing on either side of the Amplifier, use the VBC (Voltage Blocking Coupler, separate item) to block the DC voltage from passing to other devices and prevent damaging them!

Commensurate with Coaxial Cable TV Antenna and Satellite TV Power Inserter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your Satellite Receiver and TV Set(s). The Integral Grounding Block designed onto most Outdoor Use Compatible Satellite Signal Splitters and Inserters we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Satellite TV, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.


Specification
Specification Sheet
User Guide Download User Guide

Images

PS12250 DC Power Supply for Cable TV Antenna and Satellite Amplifiers
PS12250 DC Power Supply for Cable TV Antenna and Satellite Amplifiers
PS12250 DC Power Supply for Cable TV Antenna and Satellite Amplifiers The PS12250 is a Power Supply for 2.2 GHz In-Line Amplifiers. This Unit injects DC Voltage into Coaxial Cable for In-Line Amplifiers (see LA Series Amplifiers) used to counter the Cable and Splitter losses.
LA-520 Amplifier for Satellite , CableTV and Antenna in-Line Kits
LA-520 Amplifier for Satellite , CableTV and Antenna in-Line  Kits
LA-520 Amplifier for Satellite , CableTV and Antenna in-Line Kits
 
LA-2150H Amplifier for Satellite , CableTV and Antenna in-Line Kits
LA-2150H Amplifier for Satellite , CableTV and Antenna in-Line  Kits
LA-2150H Amplifier for Satellite , CableTV and Antenna in-Line Kits
HRFPI Power Inserter for Satellite , CableTV and Antenna in-Line Kits
HRFPI Power Inserter for Satellite , CableTV and Antenna in-Line  Kits
HRFPI Power Inserter for Satellite , CableTV and Antenna in-Line Kits
 

Accessories