Print this pagePrint this page

2-3/8" to 2-3/8 inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Kit 3S-2020
2-3/8" to 2-3/8 inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Kit 3S-2020
Price: $27.00

Highlights:

Hot Dip Galvanized
Joins 2-3/8" to 2-3/8" OD Pipe
U-Bolts, Plate & Hardware Included

Availability: Usually ships in 1 week
Weight: 10 lb
Description

3 Star Inc 2020 2-3/8" to 2-3/8" inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Kit
This 3S-2020 Pipe to Pipe, Pole or Tower Perpendicular Cross-over Plate Kit mounts a 2-3/8" inch OD Pipe or Antenna Mast Pole at 90 degrees to another 2-3/8" inch OD Pipe, Tube or Round Tower member component via Hot Dip Galvanized (HDG) U-Bolts, and clamping them together to a 3/8" inch thick, 6.00 x 8.00 inch HDG 3S-SCX2 Crossover Plate. This is typically used for the mounting of Conduit on a Tower, Building or Roof, as well as Antenna(s) (TV, Wireless Internet, Cellular Gateway, MIMO, DBS, Satellite, Microwave, Panel, Dish and Array) usually attached to other masts and pipe, Tower legs, Railings, Balconies, Roof Tops, etc.
Includes U-bolts, Plate and associated Hardware, Pipe and Mast Tubes are Not included but are available separately
Refer to "Specification" Tab above for More Detailed Information.

Note:

The Crossover Mounts are designed to support most WiFi , PCS, Cellular, and TV antennas. The Crossover Mounts allows you to vary the mounting pipe length and diameter, They are HDG Hot-Dipped galvanized for corrosion protection, and can easily be shipped UPS
Specification
Specification Sheet
Specification Adobe Acrobat PDF DocumentDownload

Images

2-3/8" to 2-3/8 inch OD Pipe to Pipe Crossover Plate Kit
2-3/8
The 2020 Pipe to Pipe, Pole or Tower Cross-over Plate Kit mounts a 2-3/8" inch OD Pipe or Antenna Mast Pole at 90 degrees to another 2-3/8" inch OD Pipe, Tube or Round Tower member