Easy Up EZ32A Base Plate for Telescopic Pole and Antenna Mast fits up to 2.25" OD

Price: $21.95

Highlights:
Galvanized Finish 16 gauge Steel Welded 3" Mast Collar Stake is approx. 1" OD Holds Masts 1.50" to 2.25" OD Base Mount for: ROHN H20 H30 H40 H50 Easy Up TM-20 TM-30 TM-40 TM-50

Availability: Ships in 1 to 3 Days
Weight: 4 lb

Description

Easy Up EZ 32A Base Plate with 3" Mast Collar for Telescopic Pole and Antenna Mast 1-1/2" to 2-1/4" OD
Made in the USA!
This Easy Up EZ32A Galvanized 9x9 inch 16 gauge Base Plate comes with a welded on 3 inch tall by 2.25" ID Mast Collar with single bolt Set Screw and a separate Pier Pin style Stake for Ground Level Elevation installation of Telescopic and ANY Antenna Mast Poles from 1.50 to 2.25 inch Outside Diameter in both Temporary and Permanent Base Mounting by placement upon a Gravel or Concrete Foundation with the Center Stake inserted into, and the Plate resting on top of, a (1) Foot Cubed bed of gravel or pad of Poured Concrete above surrounding soil elevation.(depending on soil and frost conditions)
Will Also Accommodate Telescopic Masts:
ROHN H20 H30 H40 H50 and Easy Up TM-20 TM-30 TM-40 TM-50
Manufacturers recommend that masts heights of 10 feet and higher above the uppermost bracket be guyed for Addition Wind Load Support. Bonding/Grounding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance

Note:

This Base Plate is THE Base Plate to use with ROHN H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic (Push-up) Masts. All the other plates have a Rod or angle piece that the Tube of the Mast centers around loosely. This Plate has a collar with a Set Screw that securely holds the Telescopic Mast Tube in place and can be in turn, cemented into the concrete Pad via the Pin provided. The word "Ground" as used in the description can be a bit of a misnomer; it does not provide a "Earth Ground" in and of itself, but rather is a junction component that rests on the ground or pad and should be Bonded to with a proper Earth Ground composed of a 5/8 inch by 8 foot Copper Clad Ground Rod as a minimum. Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.

Images

EZ32A Telescopic Antenna Mast Ground Mount EZ32A Telescopic Antenna Mast Ground Mount