3 Star Inc H504WAYGUY 4-Way Down Guy Wire Kit for 50 Foot Telescopic Antenna Mast
This H504WAYGUY Kit is a 4-way Down Guy Wire and Anchor package to secure your ROHN H50 and Easy Up TM50 Telescopic Push Up Antenna Masts at 5 levels. Guy wire gauge, Anchor size and Base Mount are Selectable Options.
(Mast is not included)
Works with the following Telescopic Masts:
ROHN- H50
Easy Up- EZ TM-50, EZ TM-50-U-95
Channel Master- 1650, 1850
THE H504WAYGUY KIT INCLUDES THE FOLLOWING + OPTIONS
| BILL OF MATERIALS: 50 Foot 4-Way Guy Wire & Anchor Kit |
| QUANTITY |
PART NUMBER |
DESCRIPTION |
| DOWN GUY WIRE SELECTION |
| 1200 FT |
(Includes) EZ 60 A |
6 Strand 20 Gauge Guy Wire |
| 1200 FT |
(Optional) EZ 60 |
6 Strand 20 Gauge Guy Wire Plastic Coated |
| 1200 FT |
(Optional) 618 |
6 Strand 18 Gauge Guy Wire |
| DOWN GUY ANCHOR SELECTION |
| 4 |
(Includes) EZ 48 |
48” by 5/8” DIA Screw Anchor w/ 6” Helix |
| 4 |
(Optional) EZ 30 |
30” by 1/2” DIA Screw Anchor w/ 3” Helix |
| CLAMPS/GRIPPLES INCLUDED |
| 20 |
(Includes) 61820GRPL |
Gripple for 20 and 18 Gauge Guy Wire used for
Termination and Tension Adjustment of Guy Wire |
| 60 |
(Includes) 1/8CCF |
1/8” Hot-Dipped Galvanized Cable Clamp |
| BASE PLATE MOUNT SELECTION |
| 1 |
(Includes) EZ 32 |
Standard Baseplate
9" Sq. Plate/No Collar
Pier Pin Included |
| 1 |
(Optional) EZ 32C |
Heavy-Duty Baseplate
9” Sq. Plate/ 6" Collar -w- (1) Set Screw
Accepts 2.25" OD Mast Pipe
Pier Pin Included |
| 1 |
(Optional) EZ TS-50 |
Heavy-Duty Direct Ground Mount
9” Sq. Plate/18" Collar -w- (2) Set Screws
Accepts 2.25" OD Mast Pipe
18.75" Welded Drive-in Rod (Stake)
For Temporary Installations |
| TELESCOPIC MAST SELECTION |
| 1 |
(Optional) EZ TM-50-U-95 |
UPS Shippable Telescopic Mast
Extends to 33.2 Feet ONLY |
General Information
This 4-Way Guy Wire and Anchor Kit is for 50 Foot Telescopic Push Up Antenna Masts.
Includes the accessories needed to SECURELY affix a Ground Based Telescopic Mast at the (5) levels of Down Guys from Guy Rings.
(Guy Rings supplied on Your Mast)
The standard Baseplate given is solely used for GROUND Mounted Installations.
There are other Mounts Designed for Roof Installations.
Wall Brackets may add to Structural integrity but do Not Replace the need for Down Guys.
Manufacturers recommend that masts heights of 10 feet and higher above the uppermost bracket be guyed for Addition Wind Load Support. Bonding/Grounding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance
PLEASE CONTACT A STRUCTURAL ENGINEER or PROFESSIONAL before installing Premise attached Structure.
As with all masts, Guy Wire Support and Grounding are CRITICAL to Antenna Survival.
Print this page
Download