Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools

My Cart

Your shopping cart is empty!

REGAL 8-Way Vertical Splitter 5-1000 MHz. -W- Ground

Price$9.95
Manufacturer CodeGRS8DGV
Stock Level: 0
AvailabilitySee Related Products
ShippingCan ship anywhere
Highlights

    Specifications

Bandwidth  5-1000MHz

Insertion   -4.5dB max.

Isolation      -20dB min

Return Loss -15dB min

Epoxy of Rear cover

110dB RFI shield.

Bulk Quantities Available Here!

Regal GRS8DGV 8-Way 1 GHz Coaxial Cable TV Antenna Signal Splitter
Gold/Red splitters achieve 1 GHz frequency by employing printed circuit board technology. This PCB is enclosed in a chromate-treated zinc alloy housing with a tongue and groove backplate/housing interface to produce a 110 dB EMI shielding. Machined F ports, flat mounting tabs and an integral heavy duty ground block further enhance this latest addition to the Regal line.
Rate this product.
Product isn't rated yet. Write a review.

8-Way Splitters are typically the Part you would use to take One (1) cable Feed and "Split" it into Eight (8) in order to Provide Signal to 8 Independant Devices, or a Total of Eight Cables to Feed Multiple Subscriber Units. If Your Distribution Run Passes Distance in Between each Feed Outlet on the Run, Maybe You need to consider Dividing the Split Locations along the Run with Multiple Split Devices or Upgrade to an Out-side Plant (OSP) Architecture. Please be Sure to Select the Appropriate Splitter not just By Manufacturer and Price. But Rather, Consider the Specifics of Bandwidth, Packaging (Indoor vs. Outdoor), Loss, Powering Requirements Up/Down-Stream and the Overall Needs of the Final System You Wish to Create...

If you are adding a splitter to an existing Cable TV or Antenna feed, you may need to compensate for the loss that you are about to introduce. The gain of a Line Amplifier should be selected to zero out the loss that follows it. In other words, if you have fifty feet of cable and a two-way splitter, then a 10 db amplifier will be fine. Conversely, if you have an eight-way splitter and hundreds of feet of cable, you will need an amplifier with a higher gain. Just as in the case of a Pre-Amplifier, however, bigger is not always better.

Commensurate with Coaxial Cable TV Antenna Splitter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your TV and Entertainment Electronics. The Integral Grounding Block designed onto every Outdoor Use Compatible RF Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.