Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

ROHN 65G Tower Torque Arm Stabilizer Assembly R-TA656

Price$1,795.00
Manufacturer CodeTA656
Qty
AvailabilityCall to Order
ShippingCan ship anywhere

Highlights

Hot Dip Galvanized
Bolt-on Part
Anti-Twist Device
Attaches to Tower Section
Provides 6-way Guy

Bulk Quantities Available Here!

ROHN TA656 Tower Torque Arm Stabilizer Assembly
Anti-twist device located in the area of the Microwave or other Focused Beam antennas. Provides six-way guying. Bolts to tower at any section attached with clamps. Must be installed as sections are joined together. The 65G tower can be used guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 500 feet.

spec. sheet



Spec. Sheet


Get Adobe Reader

 

 

 

 


Locate this Anti-twist device in the area of your Microwave Dish or Focused Beam Broadcast and Receive Antennas. Provides six-way guying, so be sure to account for the Total number of Guy wires appearing at each Tower Ground Anchor Location. Bolts to tower at any section joint, attached with joint bolts and must be installed as sections are joined together, so plan the Antenna Locations on the 65G Tower Before Assembly (Engineer their Wind Load accordingly). Install the Torque Arm Stabilizers as to not impede Installation or reception to other Antennas located on the same Tower or Adjacent Towers. Buy ROHN. Buy American.

 

 

 

 

Rate this product.
Product isn't rated yet. Write a review.

Foundation and Base Plate Engineering Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. As always, Consult your Local Structural Engineer, Building Code and NEC for guidance to Properly Installing and Grounding your ROHN 65G Tower Installation.

ROHN Products, LLC manufactures Mounting Brackets to Attach to, and derive Support from, other Load Bearing Structures in the immediate vicinity of your ROHN 65G Tower in both Self-Supporting and Guyed Installations. These 65G Brackets are all Solid Galvanized Steel and could possibly convey considerable Load to the Structures of which they are attached. Assure yourself through Investigation that the Structure you wish to Bracket to will handle the ROHN 65G Tower's Load transferred to it as is, or can be Supplemented in some Engineered fashion as to match and counter the Load applied. As always, Consult your Local Structural Engineer and Building Code for guidance.

ROHN Products, LLC manufactures Mounts to Facilitate Attachment of Popular Antenna Designs for a Multitude of Applications, including but not limited to; Wireless Internet, Amateur Radio, Cellular Telephone, SCADA, Telemetry, PCS, Microwave Point to Point, Microwave Point to Multi-Point, MDS, MMDS, Broadcast, Off-Air TV, Satellite TV, DBS, WI-FI, Business Band or CB Antenna Installations. Most Antenna Mounts and Top Cap Section Design differences involve the Diameter and Length of the Masting used, or to be applied for Use with the Particular Antenna Dimensions and Wind Loading involved. Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase.

All Information regarding the ROHN 65G Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.


ROHN 65G Buyers Guide



ROHN 65G Buyers Guide


Get Adobe Reader



This Buyers Guide will answer many questions you may have on this Product Line.

Products   Recently Viewed