ROHN TA656 Torque Arm Stabilizer Assembly Anti-Twist for 65G Guyed Tower
ROHN
Made in the USA!
This ROHN TA656 Torque Arm Anti-twist Stabilizer Down Guy Assembly is to be located in the area of the Microwave or other Focused Beam antennas to provide six-way guying. Comes in 3 Structural Pieces that joint together via Top & Bottom Plates where each piece meets another, being assembled around the Tower Section. The Assembly then attaches to each of the (3) Tower Leg Rails with U-clamps, preferably resting above the Tower Section Joint Flanges. Torque Arm Lugs are provided. The (6) Shackles required to affix Thimbles, Pre-forms and Down Guys are Not Included.
CAN BE INSTALLED AFTER SECTIONS ARE JOINED TOGETHER ON EXISTING TOWERS.
The ROHN TA656 features a 6" inch Channel. The alternate ROHN 658 features an 8" inch Channel. The wider 8" inch channel utilized at heights on the Tower that may experience more downward force.
Both are to be Specified by ROHN Engineering Staff for the Particular needs of Your Tower Height and EPA Loading.
DownloadROHN 65G Tower Top Plates, Shelf and Accessories
Foundation and Base Plate Engineering Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. As always, Consult your Local Structural Engineer, Building Code and NEC for guidance to Properly Installing and Grounding your ROHN 65G Tower Installation.
ROHN Products, LLC manufactures Mounting Brackets to Attach to, and derive Support from, other Load Bearing Structures in the immediate vicinity of your ROHN 65G Tower in both Self-Supporting and Guyed Installations. These 65G Brackets are all Solid Galvanized Steel and could possibly convey considerable Load to the Structures of which they are attached. Assure yourself through Investigation that the Structure you wish to Bracket to will handle the ROHN 65G Tower's Load transferred to it as is, or can be Supplemented in some Engineered fashion as to match and counter the Load applied. As always, Consult your Local Structural Engineer and Building Code for guidance.
ROHN Products, LLC manufactures Mounts to Facilitate Attachment of Popular Antenna Designs for a Multitude of Applications, including but not limited to; Wireless Internet, Amateur Radio, Cellular Telephone, SCADA, Telemetry, PCS, Microwave Point to Point, Microwave Point to Multi-Point, MDS, MMDS, Broadcast, Off-Air TV, Satellite TV, DBS, WI-FI, Business Band or CB Antenna Installations. Most Antenna Mounts and Top Cap Section Design differences involve the Diameter and Length of the Masting used, or to be applied for Use with the Particular Antenna Dimensions and Wind Loading involved. Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase.
All Information regarding the ROHN 65G Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.
This Buyers Guide will answer many questions you may have on this Product Line.
Sorry, we are offline,
click here to send us message
