Our Aluminum Mast Poles come in 1.25", 1.50" and 2.00" OD, and lengths of 6, 8, 10 and 16 feet for use on Aluminum Towers as Pinnacle Masts, Residential and Commercial Installations of Wall and Roof mount Starlink Terminals and Scada Remote Telemetry.
Manufacturers recommend that mast heights of 10 feet and higher above the uppermost bracket, mount and/or preceding guy level be guyed at the uppermost level for Additional Wind Load Support. Bonding/Grounding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance.

A Variety of Wall and Roof Mounts for these Masts are Available Here:
Antenna Mast Roof and Wall Mounts

We Stock Hot Dipped Galvanized & Pre-Galvanized Steel Pipe in 1-1/4", 1-7/8", 2-3/8" and 3-1/2" OD with 14 gauge and Schedule 40 wall thicknesses of 5, 7 and 10 foot lengths used on Communications Tower and Heavy Duty Wall Mounting for a variety of Cellular, PCS, Wireless Cable, Microwave, Wireless Internet, WiFi Hot Spots, DBS, MDS, MMDS and UHF/VHF Installations.
Hot Dip Galvanization provides a protective zinc coating that prevents rust and corrosion from water or moisture over time.

Galvanized steel pipes: one is pregalvanized steel pipe, short for GI pipe; The other is hot dipped galvanized steel pipe. For hot dipped galvanized steel pipe, it includes two technologies: galvanized by zinc blowing machine and galvanized by zinc pool.

Hot dip galvanizing pipe is that a Pipe was dipped into the bath after fabrication.Thickness by this method will reach minimum up to 45 µm and the thickness of the zinc coating is influenced by a number of factors, including the surface of the steel, the time the steel is dipped in the bath, the composition of the steel as well as the steel’s size and thickness.

One advantage of hot dip galvanizing is that the entire part is covered including the edges, welds, etc. giving it an all-round corrosion protection. The end product can be used outdoors in all different weather conditions. It is the most popular galvanizing method and is widely used in the construction industry.

Pre-galvanizing pipe,also known as mill galvanized pipe, hot dip mill galvanized or continuous hot dip galvanized.Pre-galvanized steel pipe refers to pipe which was galvanized while in sheet format, thus prior to further manufacturing. After the sheet is sent through the mill to be galvanized it is cut to size and recoiled.the pipe thickness will be minimum 12 µm.

One of the advantages which pre-galvanized steel has over hot dip galvanized steel is that it has a better appearance.pre-galvanized materials are used for a wide variety of products including conduit, lip and open channels.

A Variety of Tower Antenna Mount Assemblies for this Pipe are Available Here:
Tower Antenna Mount Assemblies

A Variety of Heavy Duty Antenna Wall Mounts for this Pipe are Available Here:
Heavy Duty Antenna Wall Mounts