Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools

My Cart

Your shopping cart is empty!

Signal Vision 2-Way Vertical Splitter 5-1000 MHz. -W- Ground

Price$2.60
Manufacturer CodeSV-V2G
Stock Level: 0
AvailabilityCall to Order
ShippingCan ship anywhere

Highlights

5-1000 MHz. Bandwidth
40 dB port-to-port isolation*
35 dB output return loss*
Intermod Protected
Capacitor Decoupled
Dual Plated
Flat F-Ports
100% Soldered backplate
*(Return Band)

Bulk Quantities Available Here!

Signal Vision SV-V2G 2-Way 1 GHz Coaxial Cable TV Antenna Signal Splitter
This Splitter Line has Vertical Port "F" connections with a Built-in split-bolt type ground on a Dual plated bright tin over copper flash Housing, sealed with a Solder sealed proprietary back plate, resulting in a Moisture sealed housing (15 psi) with No casting lines on ports. Patented dual-spring conical contacts surface mount technology...
Rate this product.
Product isn't rated yet. Write a review.

2-Way Splitters are typically the Part you would use to take One (1) cable Feed and "Split" it into Two (2) in order to Provide Signal to 2 Independant Devices, or One More Cables to complete the Run(s) to their Final Destination(s). Please be Sure to Select the Appropriate Splitter not just By Manufacturer and Price. But Rather, Consider the Specifics of Bandwidth, Packaging (Indoor vs. Outdoor), Loss, Powering Requirements Up/Down-Stream and the Overall Needs of the Final System You Wish to Create...

If you are adding a splitter to an existing Cable TV or Antenna feed, you may need to compensate for the loss that you are about to introduce. The gain of a Line Amplifier should be selected to zero out the loss that follows it. In other words, if you have fifty feet of cable and a two-way splitter, then a 10 db amplifier will be fine. Conversely, if you have an eight-way splitter and hundreds of feet of cable, you will need an amplifier with a higher gain. Just as in the case of a Pre-Amplifier, however, bigger is not always better.

Commensurate with Coaxial Cable TV Antenna Splitter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your TV and Entertainment Electronics. The Integral Grounding Block designed onto every Outdoor Use Compatible RF Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.