PRM-MAT Non-penetrating Peak Roof Mount Rubber Protective Mat
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/32 thick Mat measures roughly 28 wide by 42 inches long, trims neatly, place underneath Frame of Non-Penetrating mount,...
http://www.3starinc.com/protective-rubber-mat-layer-for-non-penetrating-peak-roof-mount
ROHN PRM635 Non-Penetrating Parabolic Dish Roof Mount 3.50 x 50 in. Mast
Made in the USA!
Mast Dimensions - 3“ STD. Pipe (3-1/2 O.D.) x 50-5/16”
This non-penetrating roof mount is capable of supporting dishes up to 6' in diameter for Steerable Mesh DBS and TVRO Satellite Dish Ante...
http://www.3starinc.com/rohn-prm635-non-penetrating-parabolic-dish-roof-mount-350-x-50-in-mast
ROHN PRM640 Non-Penetrating Parabolic Dish Roof Mount 4.00 x 50 in. Mast
Made in the USA!
Mast Dimensions - 3.5“ STD. Pipe (4 O.D.) x 50-5/16”
This non-penetrating roof mount is capable of supporting dishes up to 6' in diameter for Steerable Mesh DBS and TVRO Satellite Dish Antenn...
http://www.3starinc.com/rohn-prm640-non-penetrating-parabolic-dish-roof-mount-400-x-50-in-mast
ROHN PRM645 Non-Penetrating Parabolic Dish Roof Mount 4.50 x 50 in. Mast
Made in the USA!
Mast Dimensions - 4“ STD. Pipe (4-1/2 O.D.) x 50-5/16”
This non-penetrating roof mount is capable of supporting dishes up to 6' in diameter for Steerable Mesh DBS and TVRO Satellite Dish Ante...
http://www.3starinc.com/rohn-prm645-non-penetrating-parabolic-dish-roof-mount-450-x-50-in-mast
ROHN PRM655 Non-Penetrating Parabolic Dish Roof Mount 5.50 x 50 in. Mast
Made in the USA!
This non-penetrating roof mount is capable of supporting dishes up to 6' in diameter for Steerable Mesh DBS and TVRO Satellite Dish Antennas depending on wind and Ballast load (see details). The base of t...
http://www.3starinc.com/rohn-prm655-non-penetrating-parabolic-dish-roof-mount-550-x-50-in-mast
ROHN PRM6MAT Protective Rubber Mat for PRM6 Roof Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 1/8 thick Mat is for placement underneath the Frame of a PRM6 Non-Penetrating mount, on top of Roof surface...
http://www.3starinc.com/rohn_rubber_mat_layer_for_prm6_roof_mount_r-prm6mat
ROHN PRM6PAD Protective Barrier Pad for PRM6 Roof Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is for placement underneath the Frame of a PRM6 Non-Penetrating mount, on top of Roof surface...
http://www.3starinc.com/rohn_protective_barrier_pad_for_prm6_roof_mount_r-prm6pad
ROHN PWM Parabolic, Directional and Microwave Dish Pipe Bracket Wall Mount Kit
Made in the USA!
The Pole Wall Mount is a robust mount which is designed to provide secure support for Microwave, Directional or Omni Wireless Antennas, accepting from 2-7/8 up to 5.50 inch OD Pipe for a variety of Ante...
http://www.3starinc.com/rohn-pwm-pole-wall-mount-kit
Quality Cable Electronics QCE-2WAY-45 2-Way Cable TV, Antenna and Broadband Internet 1GHz Coax Splitter
This QCE-2WAY-45 digital splitters by Quality Cable and Electronics are premium grade passives, State-of-the-art, designed and tested using the most current procedures assures success in hooking ...
http://www.3starinc.com/qce_2-way_horizontal_splitter_5-1000_mhz-w-ground
ROHN R-1/2 TBE&E-12 Turnbuckle for Tower Down Guy 1/2" x 12" Round Eye to Eye
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Galvanized, Round Eye, Open Body, Working Load Limit: 2200 lbs. Ultimate Strength: 11000 lbs.
http://www.3starinc.com/12tbe_and_e_turnbuckle_12_x_12_inch_round_eye_to_eye
