ROHN ACL455 Anti-Climb Panels Safety Accessory for 45G 55G Tower Section
Made in the USA!
These ROHN ACL455 Anti-Climb Panel Kit consists of (3) Panels with associated Hardware are Installed for Protection and Public Safety on each Face of the Bottom 45G or 55G Tower Section. Search for the ACL mo...
http://www.3starinc.com/rohn_45g_55g_anti-climb_base_tower_section_panels_r-acl455
ROHN ACL65G Anti-Climb Panels Safety Accessory for 65G Tower Section
Made in the USA!
These ROHN ACL65G (aka VW915A) Anti-Climb Panel Kit consists of (3) Panels with associated Hardware that are Installed for Protection and Public Safety on each Face of the Bottom 65G Tower Section. Search for the...
http://www.3starinc.com/rohn_65g_anti-climb_tower_section_panels_r-vw915a
ROHN ACWS Anti-Climb Warning Sign "Do Not Climb" for All Towers
Made in the USA!
This ROHN ACWS Anti Climb Warning Sign Kit is an OEM product from the ROHN Factory for placement on new tower installations and replacement on existing tower sites where the sign and sticker have faded due t...
http://www.3starinc.com/rohn_tower_acws_anti_climb_warning_sign_r-acws
Blackburn ADR25 Aluminum Mechanical Connector 6 AWG–250 kcmil Single Termination
The ADR25 is a Tin-plated Aluminum Block Lug, Non-Insulated Mechanical Connector measuring 2"L x 1"W x 1.125"H. The Barrel Opening is 5/8" ID, entry from Front and Back with a Hex Set Screw th...
http://www.3starinc.com/thomas-and-betts-adr25-aluminum-one-hole-ground-block
Blackburn ADR25-21 Aluminum Mechanical Connector 6 AWG–250 kcmil Dual Termination
The ADR25-21 is a Tin-plated Aluminum Block Lug, Non-Insulated Mechanical Connector measuring 2.56"L x 1.64"W x 1-3/16"H. The Barrel Openings are 5/8" ID, entry from Front and Back with a Hex...
http://www.3starinc.com/thomas-and-betts-adr2521-aluminum-dual-ground-block
ROHN AGK1G Tower Down Guy Wire Grounding Kit
REV. F Kit. Comprises enough material to ground 3 Down Guy Anchor locations. Comes with (3) Ten Foot Ground Rods, (3) Ground Rod Clamps and 45 Feet ( 3 x 15' ) of #4 Stranded Copper Wire. Select Guy Wire Ground Clamps by Guy Wire size below...
http://www.3starinc.com/rohn_r-agk1g_down_guy_wire_ground_kit
ROHN AGK1GGX Tower Down Guy Anchor Rod Ground Kit
REV. G Kit. Comprises enough material to ground 3 Anchors. Comes with (3) Ten Foot Ground Rods, (3) Ground Rod Clamps , (3) CPC.5/.75 Anchor Rod Clamp (not included in separate kits from ROHN, but included here) and (3)10 Feet of 7/16 ...
http://www.3starinc.com/rohn_r-agk1ggx_anchor_rod_ground_kit
ROHN AGMPAD Protective Barrier Pad for AAGM Mounts
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is placed underneath the Frame of the AAGM Non-Penetrating mount, on top of Roof surface...
http://www.3starinc.com/rohn_protective_barrier_pad_for_aagm_roof_mount_r-agmpad
ROHN APL1258UM Accessory Plate for Universal Mount of Beacon Light on Any Tower Leg
Made in the USA!
This ROHN APL1258UM Accessory Plate provides for Universal Mounting of Aviation Lighting, Beacons and other Equipment at Mid Level Height on the Round or Angled leg of Any ROHN Tower Series.
http://www.3starinc.com/rohn_universal_leg_mid_level_beacon_mount_r-apl1258um
ROHN APL25G Assembly Finishing Plate and Beacon/Lightning Rod Mount on 25G Tower
Made in the USA!
This ROHN APL25G Assembly Plate is a Finishing Top Cap that is also used for Mounting Beacon Lighting, Cameras or a Lightning Rod onto the final section of a 25G Tower. The APL25G Assembly Plate Bolts...
http://www.3starinc.com/rohn_25g_assembly_plate_top_beacon_plate_r-apl25g
