Field installable adapter enables splicing of any type of cable to any other type, using pin connectors. This coupler provides greater than -30 dB structural return loss to 1 GHz and has a current rating of 20 Amps.
http://www.3starinc.com/hardline_female_splice_coupler_adapter
The 1 GHz housing to housing is a non rotational connector designed to permit the cascadability of taps and comes standard with vibration resistant locking threads.
http://www.3starinc.com/housing_to_housing_male_hardline_rotational_connector
IZZY COMSTRUT-78-HDG 7/8" x 1-5/8" Din Rail Strut Track For Pipe and Communications Cable Mounting
The COMSTRUT-78-HDG is a 7/8” x 1-5/8” x 95" Com Strut Alternating 7/16” x 1” Slots and 3/4” Round Holes HDG Finish.
http://www.3starinc.com/7-8-x-1-5-8-din-rail-strut-track-for-pipe-and-communications-cable-mounting
ROHN CP4A Top Cap Plate Kit for 65G Tower Section to Close Open Flange Joints
Made in the USA!
The ROHN CP4A Top Cap Plate Kit is designed for use with any ROHN 65G Main Tower Section. The cap plate kit contains (3) Cap Plates with all required nuts and bolts to Close the Open Flange Joints on the...
http://www.3starinc.com/rohn_65g_section_cap_plate_kit_r-cp4a
3 Star's 90 degree adapter with set screw is designed for installations where space restrictions require nonaxial connections between cables and equipment. All adapters come standard with 2.00” length entry pins, weather-sealed joints and allow for entry of a .155 diameter center conductor...
http://www.3starinc.com/90_degree_hardline_adapter
3 Star's 90 degree extended adapter with set screw is designed for installations where space restrictions require nonaxial connections between cables and equipment. All adapters come standard with 2.15” length entry pins, weather-sealed joints and allow for entry of a .155 diameter center ...
http://www.3starinc.com/90_degree_hardline_extended_adapter
ROHN CPC.5/.75 Clamp for Grounding Tower Down Guy Anchor Rods
Made in the USA!
The CPC.5./.75 Clamp is for Solid and Stranded Copper Wire and Stranded Wire Rope Grounding Connections to the Rod segment of Down Guy Anchors for ROHN Tower Down Guys, by means of affixing these 0.5 to 0.75 inch range ...
http://www.3starinc.com/rohn_r-cpc_5_75_anchor_rod_ground_clamp
ROHN CPC1.5/2 Clamp for Grounding 55G 65G Tower and Base Sections
Made in the USA!
The CPC1.5/2 Clamp is for Solid and Stranded Copper Wire and Stranded Wire Rope Grounding Connections to the 55G and 65G Main Tower Sections and Fixed Rigid Bases by means of affixing these 1.5 to 2.00 inch range Cl...
http://www.3starinc.com/rohn-r-cpc1-52-tower-base-ground-clamp
ROHN CPC1/1.25 Clamp for Grounding 25G 45G Tower and Base Sections
Made in the USA!
The CPC1/1.25 Clamp is for Solid and Stranded Copper Wire and Stranded Wire Rope Grounding Connections to the ROHN 25G and 45G Main Tower Sections and Fixed Rigid Bases by means of affixing these 1.0 to 1.25 inch r...
http://www.3starinc.com/rohn_r-cpc11_25_tower_base_ground_clamp
3 Star Inc CPP-HD2 Heavy Duty 1.00" to 2.00" OD Pipe to Pipe, Pole or Tower Crossover Clamp Set
This CPP-HD2 Heavy Duty Pipe to Pipe, Pole or Tower Perpendicular Cross-over Clamp Set mounts a 1.00" to 2.00 inch OD Pipe or Antenna Mast Pole at 90 degrees to another 1.00" to 2.00 ...
http://www.3starinc.com/heavy-duty-crossover-pole-to-pole-clamp-kit-1-inch-2-inch-od
