ROHN PR25G Peak Roof Mount Base for 25G Guyed Tower Installation
Made in the USA!
The PR25G has adjustable hinged feet to conform to nearly any roof pitch and bolts to roof surface. This Rohn Base Plate allows the ROHN 25G Tower to be Mounted onto a pitched roof peak when the Roof Structure is rei...
http://www.3starinc.com/rohn_25g_tower_base_for_peak_roof_mount_r-pr25g
VMP PRM-2 Non-penetrating Satellite Dish Pitched Roof Mount
is constructed of Gray Powder Coat Steel and uses standard concrete blocks to anchor with a 6 inch by 9 inch Foot Plate. Larger Plate Dimension than the PRM-1, and accomodates the DirecTV SlimLine Dish Package (Not Included)...
http://www.3starinc.com/non-penetrating_pitched_roof_mount_also_for_directv_slimline_dish
PRM-MAT Non-penetrating Peak Roof Mount Rubber Protective Mat
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/32 thick Mat measures roughly 28 wide by 42 inches long, trims neatly, place underneath Frame of Non-Penetrating mount,...
http://www.3starinc.com/protective-rubber-mat-layer-for-non-penetrating-peak-roof-mount
ROHN PRM635 Non-Penetrating Parabolic Dish Roof Mount 3.50 x 50 in. Mast
Made in the USA!
Mast Dimensions - 3“ STD. Pipe (3-1/2 O.D.) x 50-5/16”
This non-penetrating roof mount is capable of supporting dishes up to 6' in diameter for Steerable Mesh DBS and TVRO Satellite Dish Ante...
http://www.3starinc.com/rohn-prm635-non-penetrating-parabolic-dish-roof-mount-350-x-50-in-mast
ROHN PRM640 Non-Penetrating Parabolic Dish Roof Mount 4.00 x 50 in. Mast
Made in the USA!
Mast Dimensions - 3.5“ STD. Pipe (4 O.D.) x 50-5/16”
This non-penetrating roof mount is capable of supporting dishes up to 6' in diameter for Steerable Mesh DBS and TVRO Satellite Dish Antenn...
http://www.3starinc.com/rohn-prm640-non-penetrating-parabolic-dish-roof-mount-400-x-50-in-mast
ROHN PRM645 Non-Penetrating Parabolic Dish Roof Mount 4.50 x 50 in. Mast
Made in the USA!
Mast Dimensions - 4“ STD. Pipe (4-1/2 O.D.) x 50-5/16”
This non-penetrating roof mount is capable of supporting dishes up to 6' in diameter for Steerable Mesh DBS and TVRO Satellite Dish Ante...
http://www.3starinc.com/rohn-prm645-non-penetrating-parabolic-dish-roof-mount-450-x-50-in-mast
ROHN PRM655 Non-Penetrating Parabolic Dish Roof Mount 5.50 x 50 in. Mast
Made in the USA!
This non-penetrating roof mount is capable of supporting dishes up to 6' in diameter for Steerable Mesh DBS and TVRO Satellite Dish Antennas depending on wind and Ballast load (see details). The base of t...
http://www.3starinc.com/rohn-prm655-non-penetrating-parabolic-dish-roof-mount-550-x-50-in-mast
ROHN PRM6MAT Protective Rubber Mat for PRM6 Roof Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 1/8 thick Mat is for placement underneath the Frame of a PRM6 Non-Penetrating mount, on top of Roof surface...
http://www.3starinc.com/rohn_rubber_mat_layer_for_prm6_roof_mount_r-prm6mat
ROHN PRM6PAD Protective Barrier Pad for PRM6 Roof Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is for placement underneath the Frame of a PRM6 Non-Penetrating mount, on top of Roof surface...
http://www.3starinc.com/rohn_protective_barrier_pad_for_prm6_roof_mount_r-prm6pad
ROHN PWM Parabolic, Directional and Microwave Dish Pipe Bracket Wall Mount Kit
Made in the USA!
The Pole Wall Mount is a robust mount which is designed to provide secure support for Microwave, Directional or Omni Wireless Antennas, accepting from 2-7/8 up to 5.50 inch OD Pipe for a variety of Ante...
http://www.3starinc.com/rohn-pwm-pole-wall-mount-kit
