1-1/8" inch Bolt-Type Anchor Shackle Hot Dip Galvanized
3 Star Inc
These 1-1/8" inch Bolt-Type shackles can be specified for use with the Some of the 25G, 45G, 45GSR, 55G, 65G and 80/90 Torque Arm Stabilizer Assemblies, Down Guy Anchor Head Equalizer Plates and Other Torque Bar Stabilizer Assembly Options incorporated into GA25GD, GA45GD and GA55GD Guy Bracket Assemblies (use one for each Torque Bar, three each for a complete level).
- Size (Shackle Body Thickness): 1-1/8"
- Throat Opening (Width Between Ears): 1.81"
- Throat Depth: 4.25"
- Pin Size: 1.25"
- Pin Type: Bolt, Nut, & Cotter
- Finish: Hot Dip Galvanized
- Material: Carbon Steel Body & Alloy Steel Pin
- Working Load Limit: 9.50 tons (19000 lbs)
- Working load limit permanently shown on every shackle per ASME B30.26
A bolt-type shackle is a secure rigging connector with a shackle body, a bolt, a nut, and a cotter pin, ideal for permanent or semi-permanent setups like tower rigging, where it remains fastened against twisting forces, unlike quicker screw-pin types, offering superior security for long-term installations by preventing accidental loosening. For Tower Down Guy Wire attachment, The Tower Manufacturers Recommend that these be Used for Permanent Erection and Take-down. Existing Tower Sites should be upgraded to and New Permanent Installations should be using the Bolt-Type with Cotter Pin Anchor Shackles.
Wire Rope & Guy Wire Clamps
When you need strength and durability, 3 Star Inc has the guy wire rope clamps and thimbles to help make strong and secure guy wire rope ends when turning back to form your loop. We carry all the sizes you need for your guyed tower, mast pipe or telescopic pole installation, helping to make sure you get the job done. All the clamps we carry are forged steel made from the highest quality materials and are double-saddled plus the are designed to allow a full wrench swing making your retightening or disassembly of nuts even faster. We have the fastest shipping and largest selection of in stock cable clamps you can find. So go ahead order yours today!
Opened Thimbles
Thimbles are used to secure guy wire, guy cable, guy strand, guy anchors & rope. They offer longer service life and greater protection against wear and deformation of the wire rope eye. Also used with Pre-Formed Dead ends. Thimbles are available in light and heavy duty style for strength. Heavy Duty Wire Rope Thimbles are constructed of Hot Dipped Galvanized Steel for corrosion protection.
A bolt type shackle is a more secure version used in rigging that features the combination of a bolt and nut located alongside a cotter pin. With a bolt and nut securing the shackle pin, they remain closed even when subject to rotation. Shackles are used to lift, secure and rig heavy loads.
Round Pin Shackle :
Round pin shackles consists of a round unthreaded pin that easily slides through the ears of the shackle and is secured in place with a cotter pin. They work well in applications where the pin may be subjected to torque or twisting. They are mostly used in tie-down, towing, suspension or applications where the load is strictly in-line.
