Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

Rohn 5/8TBE&J Turnbuckle 5/8 x 12 inch Round Eye to Jaw

Price$165.00
Manufacturer CodeR-5/8 TBE&J-12
Qty
AvailabilityUsually ships in 24 Hrs

Highlights

Heavy Duty

Eye to Jaw
3500 lbs Working Load Limit

Bulk Quantities Available Here!

5/8TBE&J 5/8" x 12" ROUND Eye to Jaw Turnbuckle
Round Eye Turnbuckle, Forged, Hot Dip Galvanized, Open Body, Eye to Jaw, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs.

 

FEATURES

 

Turnbuckle are used as adjustable extension links to maintain proper tower clearance on assemblies at tower end. The body of the turnbuckle is reverse thread on opposite ends to allow tightening/loosening by simply turning the body of the turn buckle. Made of  galvanized steel, our turn buckles are built to last and weather resistant .


Specs

 

Item#                      : 5/8" TBE&J 
Product Name          : Turnbuckle, Eye and Jaw, Galvanized, 5/8" x 12"
Type                       :  Eye and Eye
Diameter                  :  5/8"
Take-up                   :  12"
Closed Length          :  16"
Working Load Limit  : 3500 lb -Working load limits are based on a safety factor of 5 to 1
Material                    : Forged Steel

Finish                       : Hot Dip Galvanized

Specification             : Federal Spec FF-T-791B Type 1 Form 1

 


 

spec. sheet


Spec. Sheet


Get Adobe Reader


 
Typical Use: when attaching and tensioning ROHN Tower and Telescopic Antenna Mast Down Guy terminations (1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH, 5/16" Strand via Pre-formed deadend and 7/16THH or 5/16" Bare Strand via Cable Clamps and 3/8THH, 3/8" Strand via Pre-formed deadend and 1/2THH or 3/8" Bare Strand via Cable Clamps and 7/16THH) to Closed Eye GAR30 or Integral Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343). Eye to Eye Turnbuckles typically attach the Tower Down Guy Strand (via a Big Grip Pre-formed Dead-End and a Heavy Open Thimble) on one end to the Down Guy Equalizing Plate (the ones that use Bolts as the attachment Method, ie; R-GAC303, R-GAC305, EP25343 and EP25345) attached to the Anchor on the other end. Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.
Compare to ROHN R-3/8TBE&E 3/8 inch Eye to eye Turnbuckle and Channel Master Turnbuckle Part# 1369!
Specification Sheet
Spec. Sheet

Antenna Guy Wire for Guyed Towers & Telescopic Masts

3 Star Stocks EHS 7 Strand Guy Wire for use on ROHN 25G, 45G, 55G and 65G Guyed Towers Systems as well as Utility OSP Cabled and Fiber Systems. Our EHS Tower Guy wire comes in 100', 250', 500',1000, in coils or reels and 5000 FT wooden spools. PLP-GWD Guy wire Dispenser available (optional). It is recommended that "Initial Tension" (10% of Maximum Limit) is attained with the Turnbuckle travel extended prior to tensioning with same. Annex the Data shown in the Table below when referencing guy charts shown for ROHN Towers:

 

 Size
 Grade
 Tensile Strength/lbs.
 Initial Tension/lbs.
3/16"
HS
2850
300
3/16"
EHS
3990
400
1/4"
HS
4750
500
1/4"
EHS
6650
700
5/16"
HS
5350
550
5/16"
EHS
11200
1100
3/8"
HS
10800
1000
3/8"
EHS
15400
1500

 

Our 6/18 (6 strand 18AWG) and 6/20 (6 strand 20AWG with or with out Plastic Coating) guy wire comes in lengths of 50', 100', 250', 500' up to 1000' FT. Choose from 6/18 and 6/20 for Guying Telescopic Antenna Masts. Also, Complete Telescopic Guy Wire Kits are also available.

Products   Recently Viewed