3S-100D LED Based Low Intensity Obstruction Light Double
3 Star Inc
3Starinc’s 3S100D LED Dual Low Intensity Obstruction Light series is a 100cd (candela) LED light designed for airway fixed obstacle marking application. It comply with ICAO & FAA regulation. It is integrated by 2 single lights. For making sure there is always a light working atop of the tower. Two optional working patterns can meet different area’s customers:
Service+Standby: Only one service light is working normally. It will auto-transfer to standby light in case of service light failure.
Service+Service: Two single lights work simultaneously. Either failure will not affect the other normal working.
Uses constant current LED driver IC, Compared with similar products, constant flow effect is good and the service life is longer.
Features
• Common relay alarm,can work independently or by controller.
• Special optical design provides better light distribution
• LED light source esures long lifetime, maintenance free
• Low power consumption
• Shock and vibration resistant
• Corrosion resistant and UV stable polycarbonate housing
• Ease of mount, mount accessories available
• Available both in single and double type
• 5 years warranty
Applications
• Telecomm tower
• Radio tower
• Wind turbine
• Smoke stacks & chimney
• Tall building
• Crane
• Power transmission line
Standards
• ICAO Annex 14, 4th Edition, July 2004
• ICAO low intensity, type B
• FAA AC No. 150/5345-43F, 2006
• FAA type L810
• DGAC USA /Mexico
Download
ROHN 65G Series Tower Sections & Concrete Embed Bases
Since there are various other Manufacturers of Towers and Tower accessories that copy the ROHN Tower design, if you are not sure of the manufacturer of your Tower, you can at least compare the actual measurements and design of yours to those found in the spec. sheets in the ROHN catalog section via the Link provided above to assure yourself that additional sections or parts will fit. We cannot make that determination for you as the ROHN clones are something we don't carry or otherwise represent in our Product line.
All Tower sections in the 65G Series use bolted flange joints in connection with other sections. Featuring a 24-1/4 inch equilateral triangular design, the 65G is constructed of extra heavy duty 1.90" O.D. steel tubing side rails measuring 24 inches Center to Center with continuous 5/8" solid steel rod bracing and are constructed with high strength steel tubing and feature ROHN's exclusive Zig-Zag ® solid rod bracing to provide exceptional strength. All 65G Series Towers are hot dip galvanized after fabrication. In this process, each section of the tower is totally immersed in molten zinc, allowing every square inch of the tower, inside and out, to be completely covered. Hot dip galvanizing protects all points of welding and construction against rust and corrosion while providing an attractive finish.
The 65G is a true multi-use structure that provides excellent strength for applications up to 500´ with heavy steel tube legs to satisfy a wide variety of needs under varied conditions. When properly installed, the standard tower will support the loads shown on various guyed and self-supporting information sheets in the ROHN catalog.
Most Restrictions Allow for 40 feet of Height without the Necessity of Guy Wires, Anchors or Braces. However, No Tower is self supporting during construction! Always use temporary guys on the top most section, and install permanent guy wires as soon as a guy point height is reached.
This Buyers Guide will answer many questions you may have on this Product Line.
