Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
ProductQtyPrice
Tower Base...1$12.95
Goods Total1$12.95
View Cart Check out
Printer View Tell a Friend

5/8 X 10 Foot Ground Rod Galvanized

Price$28.00
Manufacturer CodeGR10-GAL
Qty
AvailabilityUsually ships in 24 Hrs

Highlights

5/8" x10'

Galvanized

Bulk Quantities Available Here!

GR10GROD 5/8" x 10' Galvanized Ground Rod


A Galvanized ground rod that is 5/8 in. nominal in diameter with a length of 10 ft . Zinc-Coated exteriors are hot-dip galvanized for solid protection against corrosion , The ground rod meets NEC , UL and in accordance with ASTM® , use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with 7/16 inch IWRC wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating sealant tape). Use for REV. F Grounding of Tower Base and Down Guys or Telescopic Antenna Masts. Select a ground rod clamp based on conductor to be attached (see details).

 


REV. F Tower Grounding kits are based on 8 foot ground rod use, REV. G Tower Grounding Kits use 10 foot ground rods (that can only be shipped LTL Freight). REV. F Tower Grounding Kits use #4 Solid or Stranded Copper (use a regular 5/8 inch ground rod clamp), whereas REV. G Tower Grounding Kits rely on 7/16 inch Galvanized Steel Wire Rope (select the 3/4 inch ground rod clamp we sell here).

 

Specification Sheet
grounding type
Ground Rods

TURNBUCKLES / CLEVICES / STRANDVICE

Hot Dipped Galvanized is used to adjust the tension on Guyed Towers 

GUY WIRE

3 Star stocks guy wire for use in guying antenna masts and ROHN 25G, 45G, 55G and 65G towers. Choose from 6/18 and 6/20 for telescopic antenna masts and 1/4 inch to 5/16 inch EHS strand for guying down ROHN Towers. Our 6/18 and 6/20 guy wire comes in lengths of 50' , 100' , 250 ,500,  to 1000' FT and our EHS Tower Guy wire comes in 100' , 250' , 500' ,1000, in coils / reels and 5000' FT wooden spools. PLP-GWD Guy wire Dispenser available (optional)

Complete Telescopic Guy Wire Kits are also available.

ANCHORS

Guy Anchors are used to attach the guy-wire that helps support a tower, antenna mast or even utility poles. The anchoring is accomplished by using rods, usually  made from galvanized steel, that are screw driven, concreted into the ground or backfilled with earth.

An  anchor must be designed and rated to resist the maximum amount of tensile  load, forces tending to cause extension of the guy wires and anchoring system; both the dead load of the tension of the wire and the maximum possible theroretical live load due to wind,  gravity, ice and other forces of nature. The attached guy wires exercises its force at an angle, and because of this angle the anchor will  have r two forces of both, vertical or (up and down) and lateral (back and forth) forces on it known as lateral shear. Ground anchors rely on the lateral shear  strength of the soil. This strength or cohesion helps to mitigate by spreading the the forces from the guys wires connected  to it over a large surface area.

HARDWARE ANCHOR & GUY

3 Star Inc. stocks wire rope and EHS (Extra High Strength) strand wire rope commonly used in rigging, Tower down guy and CATV Cable TV and Telephone OSP Pole line Plant construction.

In addition you can find:

  • Turnbuckles
  • Thimbles
  • Strand wire rope
  • Clamps
  • Preformed dead-ends
  • Bolts, Nuts and Screws
  • Shackles
  • Pins
  • Dead-end sleeves
  • Earth anchors
  • Replacement hardware
  • Guy rings

All in stock. We ship same day.