30' Foot Telescoping Antenna Mast Pole Ships UPS | EZ TM-50-U-95
3 Star Inc
Made in the USA!
This 5 section 16 gauge inner, 18 gauge outers, Telescopic Antenna Mast collapses down to 95 inches in length for Shipping.
Extended Mast Height is 33' 2" and is used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas.
Manufacturers recommend that masts heights of 10 feet and higher above the uppermost bracket be guyed for Addition Wind Load Support. Bonding/Grounding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance
(Antenna, Guys and Mounts not included).
33.2' extended Height
This Item Ships UPS Package!
Mast Section Dimensions are:
(1) 94" length x 1.25" O.D. (16 AWG)
(2) 92" length x 1.50" O.D. (18 AWG)
(3) 90" length x 1.75" O.D. (18 AWG)
(4) 88" length x 2.00" O.D. (18 AWG)
(5) 86" length x 2.25" O.D. (18 AWG)
Installation Guidelines:
- Installation or dismantling of telescoping masts require professional contractors experienced with guyed masts.
- All installations must be bracketed or guyed.
- The pictured guy wire kit layouts are for a typical installation. Individual installation requirements may vary.
- Antenna load (top load) should not exceed an effective projected area (EPA) of 2 square feet (see your antenna specifications).
Download
 |
EZ TM-50-U-95 Telescopic Antenna Push Up TV & Wireless Internet Antenna Mast - UPS Shippable
EZ TM-50-U-95 Telescopic Antenna Push Up TV & Wireless Internet Antenna Mast - UPS Shippable
|
Telescopic and Antenna Mast Wall Brackets 18 inch Standoff Y Style for 1.25 to 3.00 inch OD Mast
- $28.40
The ROHN SSV tower has been in service for over 50 years. The design utilizes standard parts arranged to create a unique structure. The legs are tubular with angle braces at the bottom and solid legs and braces in the top sections. This tower is used in a variety of applications, from PCS structures and broadband to security, sports lighting and more. The SSV has proven to be one of the industry’s most efficient and preferred structures. All ROHN SSV towers are hot-dip galvanized, inside and out for corrosion protection.
| General Notes: 1. Standard tower designs are in accordance with approved national standard ANSI/TIA-222-G, Structure Class II, Topographic Catergory 1, 3/4” design ice thickness, seismic coeffilient SS < 1.0. 2. Tower designs assume allowable projected areas are symmetrically placed on the tower. 3. Designs assume one 7/8 line to top and two 7/8 lines to 30 feet below top, one line on each face. 4. All towers are provided with step bolts and a tapered top. 5. Grounding kit must be ordered separately. 6. Assembly drawings and standard foundation details are supplied with the tower. 7. Custom designs for site-specific applications are available upon request |
 |
 |
