30' Foot Telescoping Antenna Mast Pole Ships UPS | EZ TM-50-U-95
3 Star Inc
Made in the USA!
This 5 section 16 gauge inner, 18 gauge outers, Telescopic Antenna Mast collapses down to 95 inches in length for Shipping.
Extended Mast Height is 33' 2" and is used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas.
Manufacturers recommend that masts heights of 10 feet and higher above the uppermost bracket be guyed for Addition Wind Load Support. Bonding/Grounding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance
(Antenna, Guys and Mounts not included).
33.2' extended Height
This Item Ships UPS Package!
Mast Section Dimensions are:
(1) 94" length x 1.25" O.D. (16 AWG)
(2) 92" length x 1.50" O.D. (18 AWG)
(3) 90" length x 1.75" O.D. (18 AWG)
(4) 88" length x 2.00" O.D. (18 AWG)
(5) 86" length x 2.25" O.D. (18 AWG)
Installation Guidelines:
- Installation or dismantling of telescoping masts require professional contractors experienced with guyed masts.
- All installations must be bracketed or guyed.
- The pictured guy wire kit layouts are for a typical installation. Individual installation requirements may vary.
- Antenna load (top load) should not exceed an effective projected area (EPA) of 2 square feet (see your antenna specifications).
Download
 |
EZ TM-50-U-95 Telescopic Antenna Push Up TV & Wireless Internet Antenna Mast - UPS Shippable
EZ TM-50-U-95 Telescopic Antenna Push Up TV & Wireless Internet Antenna Mast - UPS Shippable
|
Telescopic and Antenna Mast Wall Brackets 18 inch Standoff Y Style for 1.25 to 3.00 inch OD Mast
- $28.40
Keystone Jack Module Inserts
A Keystone module is an industry standard type of wall jack used in residential and business environments. The system consists of a modular face plate to which jacks are mounted. Flush mount Keystone Wallplates will fulfill the most complicated station installation requirements through a wide selection of snap-in modules. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements of voice, data, audio, video, fiber optic, etc. The inserts are a snap to install and remove, giving you a highly adaptable system.
A keystone jack module is a standardized snap-in package for mounting a variety of low-voltage electrical jacks such as TV, Phone, LAN, Data, BNC, RCA or optical connectors into a keystone wall plate, surface-mount box, or a patch panel. Keystone modules have a commonly popular standardized rectangular face of 14.5mm wide by 16.0mm high and are held in place with a flexible tab. This allows them to be snapped into or out of a mounting plate with correspondingly-sized rectangular holes, called ports. All keystones, regardless of the type of jack they carry, are interchangeable and replaceable. This is what makes Keystone a popular choice in today's installations at Home or Office. Some keystones use a pass-though type connector, where there is a jack on both the front face as well as the rear side. Others only have a jack on the front and employ a different means for hard-wiring signal cables in the rear, such as a mini 110, insulation-displacement connector, crimp or solder connection.
