30' Foot Telescoping Antenna Mast Pole Ships UPS | EZ TM-50-U-95
3 Star Inc
Made in the USA!
This 5 section 16 gauge inner, 18 gauge outers, Telescopic Antenna Mast collapses down to 95 inches in length for Shipping.
Extended Mast Height is 33' 2" and is used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas.
Manufacturers recommend that masts heights of 10 feet and higher above the uppermost bracket be guyed for Addition Wind Load Support. Bonding/Grounding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance
(Antenna, Guys and Mounts not included).
33.2' extended Height
This Item Ships UPS Package!
Mast Section Dimensions are:
(1) 94" length x 1.25" O.D. (16 AWG)
(2) 92" length x 1.50" O.D. (18 AWG)
(3) 90" length x 1.75" O.D. (18 AWG)
(4) 88" length x 2.00" O.D. (18 AWG)
(5) 86" length x 2.25" O.D. (18 AWG)
Installation Guidelines:
- Installation or dismantling of telescoping masts require professional contractors experienced with guyed masts.
- All installations must be bracketed or guyed.
- The pictured guy wire kit layouts are for a typical installation. Individual installation requirements may vary.
- Antenna load (top load) should not exceed an effective projected area (EPA) of 2 square feet (see your antenna specifications).
Download
 |
EZ TM-50-U-95 Telescopic Antenna Push Up TV & Wireless Internet Antenna Mast - UPS Shippable
EZ TM-50-U-95 Telescopic Antenna Push Up TV & Wireless Internet Antenna Mast - UPS Shippable
|
Telescopic and Antenna Mast Wall Brackets 18 inch Standoff Y Style for 1.25 to 3.00 inch OD Mast
- $28.40
ROHN Direct Embed Monopole Towers
GENERAL USE:
ROHN Direct Embed Poles minimize site requirements, lowering lease rates and acquisition costs. They are designed for rapid installation, meeting the demands of today’s dynamic communication environments. Whether you are supporting broadband, PCS, security or other lightweight systems, ROHN Tapered Steel Poles offer extremely efficient designs.
FEATURES:
• Completely hot-dip galvanized after fabrication
• Fast, easy installation
• Designed for applications with stringent deflection requirements
• Internal routing of transmission lines
• Each pole ships with the following:
Assembly Drawings and Standard Foundation Details
(4) 5” x 7” Ports with (2) port covers
(3) Jacking Lugs on each side of splices
(3) Ground attachment clips
(1) Vented cap plate
(1) Bearing plate welded to bottom
Safety Climb Support Brackets
(1) Safety warning sign
(1) Pole ID tag
Attachment clips for optional step bolts
• Optional items are available and may be ordered separately.
• Custom designs available for any height or application.
Per Rev G requirements, any structure greater than 10’ requires a climber safety device.
