5/8 X 8 Foot Ground Rod Copper Clad
ROHN R-340020 5/8" x 8' Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating tape sealant). Use for REV. F Grounding of Tower Base and Down Guys or Telescopic Antenna Masts. Select a ground rod clamp based on conductor to be attached (see details).
REV. F Tower Grounding kits are based on 8 foot ground rod use, REV. G Tower Grounding Kits use 10 foot ground rods (that can only be shipped LTL Freight). REV. F Tower Grounding Kits use #4 Solid or Stranded Copper (use a regular 5/8 inch ground rod clamp), whereas REV. G Tower Grounding Kits rely on 7/16 inch Galvanized Steel Wire Rope (select the 3/4 inch ground rod clamp we sell here).
Alarm Wire
Quality Cable and Wire for Professional Alarm and Security System Installations. Note that Some cables may contain Wire that has twisted Copper Conductors as Opposed to those of Solid Bare Copper Conductors. Cable Jacketing will Also Vary between Types and Classifications from CM, CL, CL2, CL3 with Riser(R) and Plenum(P) Designations. While each Serves the Same Purpose in delivery of Low Voltage and Signal Distribution, Their Use per Classification is Covered by Several Different Standards and Codes. Make sure that the Cable and Wire You Purchase Equals or Exceeds the Classification of Use as to Avoid any problems during Inspection and Validation of Your System.
