5 Foot Tripod for Antenna Mast - 1.25" OD (6 Bolts + Supporting Cup)
EZ 48-5A 5 Foot Roof Mount Tripod for Antenna MastHolds masts up to 1.75" diameter. Made of 1.25" OD- 18 gauge galvanized tubing. Spread 32" Mast supported by 6 bolts; plus supporting cup. Mast not included. Made in America.
Specifications:
Materials: 1.25” OD - 18 gauge galvanized tubing
Height: 5 ft
No. of Bolts to Hold Mast: 6
Accepts Mast Up To: Up to 1.75 in
Weight: 14 lb
Typical rafter spacings are 16 inches center to center and pre-built trusses are 24 inches center to center. Heavy Duty 18 Gauge Galvanized Steel 3 ft. Antenna Tripod can Permanently mount an antenna or satellite dish on the peak of a roof, or almost anywhere!
Alarm Wire
Quality Cable and Wire for Professional Alarm and Security System Installations. Note that Some cables may contain Wire that has twisted Copper Conductors as Opposed to those of Solid Bare Copper Conductors. Cable Jacketing will Also Vary between Types and Classifications from CM, CL, CL2, CL3 with Riser(R) and Plenum(P) Designations. While each Serves the Same Purpose in delivery of Low Voltage and Signal Distribution, Their Use per Classification is Covered by Several Different Standards and Codes. Make sure that the Cable and Wire You Purchase Equals or Exceeds the Classification of Use as to Avoid any problems during Inspection and Validation of Your System.
