5' Foot x 1.50" inch OD Satellite TV Antenna Mast Pole Pipe Swaged | 3S-5-150S
3 Star Inc
This 5 Foot (60") by 1.50" OD 18 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 18 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 5 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Ideal as a TV, Radio, WISP, Wireless Internet, Cellular, DISH500 and DIRECTV Dish Antenna Mast (will NOT work for DIRECTVs SL3/5) for Ground or Wall mount Installation. There's a Big difference between 18 AWG and 16 AWG when it comes to joining Swaged to Straight Antenna Masts. You cannot mix and match 16 and 18 gauge masts so please, verify the mast you have before purchasing a complimenting swaged section. Be Sure and afford yourself 2 feet minimum, up to 1/3 of the overall mast length between the two wall mounts you would utilize in your TV antenna Installation. The Torque applied from wind load through cantilever to these mounts can be significant.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)
ROHN Monopole Towers
GENERAL USE:
ROHN Direct Embed Poles minimize site requirements, lowering lease rates and acquisition costs. They are designed for rapid installation, meeting the demands of today’s dynamic communication environments. Whether you are supporting broadband, PCS, security or other lightweight systems, ROHN Tapered Steel Poles offer extremely efficient designs.
FEATURES:
• Completely hot-dip galvanized after fabrication
• Fast, easy installation
• Designed for applications with stringent deflection requirements
• Internal routing of transmission lines
• Each pole ships with the following:
Assembly Drawings and Standard Foundation Details
(4) 5” x 7” Ports with (2) port covers
(3) Jacking Lugs on each side of splices
(3) Ground attachment clips
(1) Vented cap plate
(1) Bearing plate welded to bottom
Safety Climb Support Brackets
(1) Safety warning sign
(1) Pole ID tag
Attachment clips for optional step bolts
• Optional items are available and may be ordered separately.
• Custom designs available for any height or application.
Per Rev G requirements, any structure greater than 10’ requires a climber safety device.
