3 Star Inc
This 5 Foot (60") by 1.50" OD 18 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 18 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 5 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Ideal as a TV, Radio, WISP, Wireless Internet, Cellular, DISH500 and DIRECTV Dish Antenna Mast (will NOT work for DIRECTVs SL3/5) for Ground or Wall mount Installation. There's a Big difference between 18 AWG and 16 AWG when it comes to joining Swaged to Straight Antenna Masts. You cannot mix and match 16 and 18 gauge masts so please, verify the mast you have before purchasing a complimenting swaged section. Be Sure and afford yourself 2 feet minimum, up to 1/3 of the overall mast length between the two wall mounts you would utilize in your TV antenna Installation. The Torque applied from wind load through cantilever to these mounts can be significant.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)
The SSV self-supporting tower sections use angle steel cross bracing with lighter upper sections using a Zig-Zag brace pattern. The SSV tower sections can be combined with “K” braced SSMW self-supporting tower sections for added height and strength when needed.
Time tested strength and design, the ROHN SSV series of self-supporting towers provide an excellent strength to cost ratio proven by years of use. In production for nearly years in our tower design and tower manufacturing facilities, the SSV tower has evolved into a highly efficient and wide ranging system of custom towers produced from pre-engineered sections. The ROHN SSV tower is the quality standard in the industry for small to mid range self-supporting towers.
ROHN SSV towers are in use world-wide for:
ROHN SSV towers are available with a wide variety of pre-designed accessories including: