EZ NP-175 Non-Pen Roof Mount FRM Frame for up to 1.75 inch OD Antenna Mast

EZ 5-16 5' Foot Antenna Mast Pole Pre-galvanized 1.25" inch Diameter 16 AWG Pipe
Made in the USA!
5 ft Antenna Mast Pole for Medium to Heavy Duty Outdoor Antenna mounting, made of a 1-1/4 inch pre-galvanized 16 gauge Pipe. Standard not only for TV and Radio reception, but Cellular Phone and Date Gateway repeaters, WISP, Wireless Internet, Telemetry, CB, HAM and more!
(Mount Not Included)

3 Star Inc EZ 5-18 1.25 inch OD by 5 foot long Outdoor Antenna Mast Pole 18 AWG Pipe
Made in the USA!
A 1.25" OD by 60" long (5 Foot) 18 AWG Pre-galvanized Light to Medium Duty Antenna Mast Pole Pipe. This 1-1/4 inch Diameter Antenna Mast is Standard not only for TV and Radio reception, but Cellular Phone and Date Gateway repeaters, WISP, Wireless Internet, Telemetry and more.
(Mount Not Included)

3 Star 5992 6 Foot 1.66 O.D. Steel Satellite Dish Ground Pole Mast
Ideal as a DISH500 and DIRECTV Dish Antenna Mast (will NOT work for DIRECTVs SL3/5) for Ground or Wall mount Installation (Mount Not Included)...

3 Star Inc EZ 43-A 3-Way Adjustable Down Guy Ring Collar for 1.25 inch Antenna Mast Pole
Made in the USA!
Adjustable Mount Down Guy Ring, for 3-Way guying of Antenna masts with Screw Eye Bolts to affix 620 guy wire, Fits Masts up to 1 1/4". (Mast and Guy Wire Not Included).

VMP FRM-125 Non-Penetrating Antenna Roof Mount with 1.25" OD x 60" Mast
Ideal for Off-Air TV and Wireless Internet Antenna mounting, is constructed of Powder Coated Steel steel and uses standard concrete blocks as ballast.

ROHN FRM125 Non-Penetrating Roof Antenna Mount 1.25" OD x 60 inch Mast
Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount and mast tube are 16 gauge Pre-Galvanized for corrosion protection.

3 Star Inc 3S-FRMMAT Rubber Protective Mat for Non-Penetrating Roof Antenna Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/32 inch thick Mat measures roughly 36 wide by 42 inches long, trims neatly, place underneath Frame of Non-Penetrating mount, on top of Roof surface.