5' Foot Antenna Mast Pole Pre-Galvanized Outdoor 1.25" inch OD 16 AWG Pipe | EZ 5-16

3 Star Inc EZ 5-16S 5' Foot x 1.25" inch OD 16 AWG Swaged Galvanized Antenna Mast Pole Pipe
Made in the USA!
This 5 Foot (60") by 1.25" OD 16 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 16 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 5 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Manufacturers recommend that masts heights of 10 feet and higher be guyed for Addition Wind Load Support.
(Mount Not Included)

EZ 8-16 -8 Foot Galvanized

Made in the USA!
This is a 9 Foot (108") by 1.25" OD 16 AWG Galvanized Antenna Mast (Mount Not Included)...

3 Star Inc EZ 8-16S 8' Foot x 1.25" inch OD 16 AWG Swaged Galvanized Antenna Mast Pole Pipe
Made in the USA!
This 8 Foot (96") by 1.25" OD 16 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 16 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 8 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Manufacturers recommend that masts heights of 10 feet and higher be guyed for Addition Wind Load Support.
(Mount Not Included)

EZ 10-16 10 Foot x 1.25 inch OD 16 AWG Galvanized Antenna Mast Pole Pipe
Made in the USA!
This is a 10 Foot (120") by 1.25" OD 16 AWG Galvanized Antenna Mast
(Mount Not Included)
This Item Ships LTL Freight ONLY.

3 Star Inc EZ 10-16S 10' Foot x 1.25" inch OD 16 AWG Swaged Galvanized Antenna Mast Pole Pipe
Made in the USA!
This 10 Foot (120") by 1.25" OD 16 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 16 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 10 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Manufacturers recommend that masts heights of 10 feet and higher be guyed for Addition Wind Load Support.
(Mount Not Included)
This Item Ships LTL Freight ONLY.

EZ 48-3A 3 Foot Roof Mount Tripod for Antenna MastHolds masts up to 1.75" diameter. Made of 1.25" OD- 18 gauge galvanized tubing. Spread 32" Mast supported by 6 bolts; plus supporting cup. Mast not included. Made in America.

EZ 22-3A 3 Foot Roof Mount Tripod for Antenna Mast

Holds masts up to 1.66" diameter. Made of 1"OD- 18 gauge galvanized tubing. Spread 32" Mast supported by 6 bolts; plus supporting cup. Mast not included. Made in America.

3S- 6031 3 Foot Roof Mount Tripod for Antenna Mast
Tripod holds mast up to 1.75 inch O.D. and is made of 1.25"OD-18 Gauge Galvanized tubing has  a universal mast clamp and has installer friendly front facing feet that line up 16 inches center to outer legs , a 28" x 1.66" Pipe Included...