ROHN 25G90R050 50' foot 25G Guyed Tower Complete 90/70 MPH Rated Kit
Made in the USA!
The ROHN 25G90R050 50' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G90R050 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 50 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 90 MPH (Rev. G) and 70 MPH (Rev. F).
This ROHN 25G Tower is to be used in a Guyed Configuration for Wireless Internet, Amateur and Business Radio, SCADA, DBS and Satellite Services, Cellular and Repeater, Smaller Microwave, Narrow Beamwidth Antenna or Broadcast Installations according to Specifications in the ROHN Catalog.
As a Guyed Structure, a 90 MPH Rated ROHN 25G Tower can rise to a Maximum of 190 Feet.
Click on the More Info and Specification Tabs above for all the Information You Need on this Product including EPA (Effective Projected Area wind load permissible of Antenna Surface Area in Square Feet), Foundation, Guying, Assembly and Grounding Detail Information.
This Item Ships LTL Freight ONLY!
EPA for Exposure B / Revision G = 21.3 (Sq. Ft.)
EPA for Exposure C / Revision G = 15.8 (Sq. Ft.)
EPA at ( 70 MPH) per Revision F = 21.0 (Sq. Ft.)
THIS 25G90R050 KIT INCLUDES / PLUS OPTIONS
| BILL OF MATERIALS: 25G90R050 90/70 MPH RATED PRE-ENGINEERED KIT |
| QUANTITY |
PART NUMBER |
DESCRIPTION |
| 1 |
25AG2* |
Top Cap Tower Section |
| 4 |
25G |
10' Main Tower Section |
| 1 |
25AJBK |
Bolt Kit for 25G Top Section |
| 4 |
25JBK |
Bolt Kit for 25G Tower Section |
| 1 |
BPC25G |
Standard Concrete Base Plate |
| 2 |
GA25GD |
Guy Wire Bracket Assembly |
| 350 ft |
3/16EHS |
3/16” Extra High Strength Strand |
| 6 |
PLP-115 |
Yellow Plastic Guard for Down Guys |
| 12 |
BG2142 |
3/16" Big Grip Preform Dead-ends |
| 12 |
5/16THH |
5/16" Heavy Duty Thimble |
| 6 |
1/2TBE&J |
1/2" x 12" Turnbuckle Eye-to-Jaw |
| 3 |
TBSAFETY |
Turnbuckle Safety Wire and Clamps Kit includes:
(1) 14001 – 1/4” Galvanized Guy Clamp
(1) 1/44GW15 – 1/4” x 15’ Guy Wire |
| 3 |
GAC3455TOP |
Guy Anchor with 5 Hole Equalizer Plate |
| 1 |
AGK1GGX |
Anchor Rod Ground Kit includes:
(3) 15' of 7/16 EIP IWRC RRL
(3) 5/8" x 10' Galvanized Ground Rod (AKA 6260)
(3) 3/4” Clamp No. 8034 WB (AKA 340016)
(3) CPC.5/.75 Anchor Rod Clamp |
| 3 |
BGK3GGX |
Tower Base Section Grounding Kit includes:
(1) 15' of 7/16 EIP IWRC RRL
(1) 5/8" x 10' Copper Clad Ground Rod
(1) 3/4" Clamp Ground Rod Clamp
(1) CPC1/1.25 Tower Section Rail Clamp |
| 3 |
CPC.5/.75 |
Anchor Rod Clamp |
| 1 |
3/4x12PP |
Concrete Base Plate Pier Pin Insert |
| 1 |
ASSEMBLY GUIDE |
Printed Specification/Assembly Guide |
The 25AG2* Top Cap Tower Section is the Default Standard
Top Section for the 25G Series Tower Kits.
We Offer the following Substitutions when Ordering Our Kits:
TOP CAP TOWER SECTION OPTIONS
| OPTIONAL TOP CAPS FOR 25BRKT040 KIT |
| PART NUMBER |
DESCRIPTION |
HEIGHT |
O.D. |
| 25AG |
Top Cap |
9' |
2" |
| 25AG2* |
Top Cap (default) |
9' - 9" |
2.25" |
| 25AG3 |
Top Cap |
9' - 3 1/2" |
2.25" |
| APL25G** |
Assembly Plate + |
10' 25G |
Flat Plate |
| BPL25G** |
Bearing Plate + |
10' 25G |
Pre-Drilled Plate |
The ROHN APL25G is an Assembly Plate used for Finishing Off a Tower that doesn't require an AG Pinnacle Top Cap Section, and for mounting LRCL Lightning Rods, Aviation Beacon Lighting, Cameras and More.(Field Drilling may be Required)
The ROHN BPL25G is a Thrust Bearing Plate used for Suspending the Antenna and Mast weight off of a Rotor Connected below. It is Factory Drilled to accept a DXE-TB-300 / DXE-TB-400. (Field Drilling may be Required for other Brands)
When Selecting this APL25G** or BPL25G** OPTION, a 10' 25G Standard Tower Section will Substitute the 25AG2* Default Top Cap Tower Section Selection in order to maintain the Tower Height Ordered.
Print this page
Download PDF