3 Star Inc 5994 1.66 to 2 Inch OD Combination Satellite Dish TV Antenna Mast Pole Pipe
This Antenna Mast Pipe features 1.66" OD on one end with 2.00" OD on the other end of a 28" long 16 AWG Galvanized Antenna Mast Pole Pipe.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

ROHN PRM655 Non-Penetrating Parabolic Dish Roof Mount 5.50 x 50 in. Mast
Made in the USA!
This non-penetrating roof mount is capable of supporting dishes up to 6' in diameter for Steerable Mesh DBS and TVRO Satellite Dish Antennas depending on wind and Ballast load (see details). The base of the roof mount is 10.5’ triangular using 48 standard concrete blocks used as ballast to form the base.
This Item Ships LTL Freight ONLY.

ROHN 160505GHS 5 Foot Tall by 1.25 inch OD 16 AWG HDG Swaged Antenna Mast Pole Pipe
Made in the USA!
This 5 Foot (60") by 1.25" OD 16 AWG Medium to Heavy Duty Swaged-end Outdoor Antenna Mast tube is Hot Dip Galvanized (HDG) for Extreme Weather Resistance and adds a layer of zinc in the process which may make fitment difficult with other pre-galvanized (Non-HDG) Swaged-end Masts. If you are Looking to increase height by multiples of 5 foot using HDG 16 AWG masts, we recommend that you use the ROHN 5-16S Swaged-end HDG Masts solely, which are notched on the receiving end in addition to being swaged on the other for stacked fitment with another swaged section.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

3 Star Inc 3S-FRM-238 Non-Penetrating Flat Roof Antenna Mount with 2.38" OD x 5 foot Mast
Made in the USA!
The FRM-238 is a Flat Roof Mount with a 2.375" OD x 30 inch Antenna Mast that is ideal for Light to Medium Duty Off-Air TV, Cellular, Wireless Internet, SCADA, CCTV, Telemetry, Flat Panel, Small Parabolic and Microwave Dish Links, MIMO, Specialty Omni Reception, Specialty UHF, Starlink Gen 3, HughesNET, DirecWAY, StarBand, DBS, Fiberglass Whip and other medium sized, slightly weighty Antenna mounting. It can be configured as a Non-Penetrating, Guyed or Screw-down installation on a Flat Roof or at Ground level, and comes with assembly hardware. Non-Penetrating installations typically use (8) Standard Sized (8 x 8 x 16 inch) Concrete Blocks (Not Included) as Ballast Weight placement upon the 35.5 x 35.5 inch Pre-galvanized Square Frame Base, with a Mat or Pad underneath (available separately) as to avoid roof membrane marring and penetrations.

ROHN 160505PHS 5 Foot Tall by 1.25 inch OD 16 AWG Hot Dip Galvanized Antenna Mast Pole Pipe
Made in the USA!
This 5 Foot (60") by 1.25" OD 16 AWG Medium to Heavy Duty Antenna Mast tube is Hot Dip Galvanized (HDG) for Extreme Weather Resistance and adds a layer of zinc in the process which may make fitment difficult with other pre-galvanized (Non-HDG) Swaged-end Masts. If you are Looking to increase height by multiples of 5 foot using HDG 16 AWG masts, we recommend that you use the ROHN 160505GHS Swaged-end HDG Masts solely, which are notched on the receiving end in addition to being swaged on the other for stacked fitment with another swaged section.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)