3 Star Inc EZ 5-16S 5' Foot x 1.25" inch OD 16 AWG Swaged Galvanized Antenna Mast Pole Pipe
Made in the USA!
This 5 Foot (60") by 1.25" OD 16 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 16 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 5 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Manufacturers recommend that masts heights of 10 feet and higher be guyed for Addition Wind Load Support.
(Mount Not Included)

ROHN 25SS030 30' foot 25G Self-Supporting Tower Complete Pre-engineered Kit
Made in the USA!
The ROHN 25SS030 30' foot 25G Self-Supporting Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna load and Wind Speed indicated. This 25SS030 Kit is comprised of (2) 10' Tower Section(s), (1) Top Cap Section, (1) 5' Base Section and Grounding Package(optional), less Foundation and Installation.
This Item Ships LTL Freight ONLY!

Easy Up EZ NP-30-166 Non-Penetrating Low Profile Roof Mount 1.66" OD x 30 inch Antenna Mast
Made in the USA!
The NP-30-166 is a Flat Roof Mount with a 1.66" OD x 30 inch Antenna Mast that is ideal for Light Duty Off-Air TV, Cellular, Wireless Internet, SCADA, CCTV, Telemetry, Flat Panel, Small Parabolic 2.4/5.8 GHz. MIMO Link, Specialty Omni Reception, Specialty UHF, Starlink Gen 3, Single Satellite DirecTV and DISH Network, DBS and other small Antenna mounting. It can be configured as a Non-Penetrating, Guyed or Screw-down installation on a Flat Roof or at Ground level, and comes with assembly hardware. Non-Penetrating installations typically use (6) Standard Sized (8 x 8 x 16 inch) Concrete Blocks (Not Included) as Ballast Weight placement upon the 28.5 x 35.5 inch Pre-galvanized Square Frame Base, with a Mat or Pad underneath (available separately) as to avoid roof membrane marring and penetrations.

Easy Up EZ NP-60-200 Non-Penetrating Low Profile Roof Mount 2.00" OD x 53 inch Antenna Mast
Made in the USA!
The NP-60-200 is a Flat Roof Mount with a 2.00" OD x 53 inch Antenna Mast that is ideal for Light Duty Off-Air TV, Cellular, Wireless Internet, SCADA, CCTV, Telemetry, Flat Panel, Small Parabolic 2.4/5.8 GHz., Microwave, MIMO Link, Specialty Omni Reception, Specialty UHF, Starlink Gen 3, DirecTV Slimline, AT9, WildBlue (ViaSat), Super DISH, DBS, Fiberglass Whip and other medium sized, slightly weighty Antenna mounting. It can be configured as a Non-Penetrating, Guyed or Screw-down installation on a Flat Roof or at Ground level, and comes with assembly hardware. Non-Penetrating installations typically use (6) Standard Sized (8 x 8 x 16 inch) Concrete Blocks (Not Included) as Ballast Weight placement upon the 28.5 x 35.5 inch Pre-galvanized Square Frame Base, with a Mat or Pad underneath (available separately) as to avoid roof membrane marring and penetrations.

3 Star Inc FRM-150 Non-Penetrating Flat Roof Antenna Mount with 1.50" OD x 5 ft. Mast
Made in the USA!
The FRM-150 is a Flat Roof Mount with a 1.50" OD x 60 inch (5 ft.) Antenna Mast that is ideal for Light to Medium Duty Off-Air TV, Cellular, Wireless Internet, SCADA, CCTV, Telemetry, Flat Panel, Starlink Gen 3, Small Parabolic 2.4/5.8 GHz. MIMO Link, Specialty Omni Reception, Specialty UHF, Fiberglass Whip and Small Diameter Narrow Beam-width Antenna placement. It can be configured as a Non-Penetrating, Guyed or Screw-down installation on a Flat Roof or at Ground level, and comes with assembly hardware. Non-Penetrating installations typically use (8) Standard Sized (8 x 8 x 16 inch) Concrete Blocks (Not Included) as Ballast Weight placement upon the 35.5 x 35.5 inch Pre-galvanized Square Frame Base, with a Mat or Pad underneath (available separately) as to avoid roof membrane marring and penetrations.
Mast pipe length may be 58" actual length for shipping purposes.