ROHN FRM166 Non-Penetrating Roof Antenna Mount 1.66" OD x 30 inch Mast
ROHN
Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16" tray to fit concrete blocks, typically used as ballast for placement of various TV, Radio, Microwave, WiFi and Wireless Internet Antennas. The base mount and mast tube are 16 gauge Pre-Galvanized for corrosion protection and goes together quickly.
Mast Dimensions - 1.66" 16 GA Pipe (1-5/8 O.D.) x 30”
Antenna and wind loads vs ballast weight, Spec.s and Buyers Guides are found in the Specification Tab above.
Height and Antenna Loading capability are dependent upon ballast weight. You need to Consult an Engineer to determine the Load Bearing Capability of the roof that you are entertaining such an Installation. Please refer to the Chart (pdf link above) which is a great place to start in determining whether your circumstances qualify for such an installation. If you cannot find someone local to evaluate the registered plans for your Flat Roof Structure, ROHN may be able to put you in contact with someone who can.
Download PDF
Download PDF
Professional Grade Telescopic Push Up Poles for Digital TV, Wifi Antenna & Weather Sensors.
We stock the highest quality telescopic masts made from 18 and 16 AWG galvanized steel right here in the USA. These telescoping push up poles are suitable for tons of applications where a fast an simple extension is needed. They have been used for everything from digital TV antenna applications to wireless communications to weather stations and even IoT Sensors. The masts can be used retracted or fully extended and anywhere in between. They can be supported and mounted against a structure, mounted on a roof or even guyed in the middle of a field. Our reliable and durable telescopic poles come in heights of 20, 30, 35, 40 and 50 FT and all have a engineered thumbscrew/collar system for setting height.
Note:
These telescoping masts are not recommended for commercial, CB or beam antenna installations.
Antenna load (top load ) should not exceed an effective projected area ( EPA ) of 2 square feet ( see your antenna specifications
Looking for just a simple mast pipe? View our similar antenna mast poles for lengths ranging from 5 FT to 10 FT and our variety of telescopic mast mounts to complete your next installation.
Sorry, we are offline,
click here to send us message
