Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
ProductQtyPrice
VMP FRM-125...2$299.95
5' Foot Antenna...2$16.00
5' Foot Antenna...2$16.30
EZ NP-30-166...1$94.95
10' Foot x...3$28.90
3-Way Down...1$8.95
10' Foot x...1$27.95
1.25" inch...1$14.50
8' Foot x 1...1$27.95
Non-Penetrating...1$193.00
ROHN FRM125...1$158.00
10' Foot x...2$42.00
Non-Penetrating...1$110.00
8' Foot x 1...1$27.00
Goods Total20$1,497.50
View Cart Check out

Categories

Printer View Tell a Friend

10' Foot x 1.25" inch OD 16 AWG HDG Antenna Mast Pole Pipe Swaged | ROHN 161005GHS

× 10' Foot x 1.25" inch OD 16 AWG HDG Antenna Mast Pole Pipe Swaged | ROHN 161005GHS was added to your Shopping Cart.
Price$42.00
Manufacturer Code161005GHS
Stock Level: 162
Qty
AvailabilityShips in 1 to 3 Days

Highlights

10 feet Long
1.25 inch OD
One Swaged End
Other End Notched
Hot Dipped
Galvanized Finish
16 AWG Thickness
Made in the USA!

Bulk Quantities Available Here!

ROHN 161005GHS 10' Foot x 1.25" inch OD 16 AWG HDG Antenna Mast Pole Pipe Swaged
Made in the USA!Made in the USA!
This is a 10 Foot (120") by 1.25" OD 16 AWG HDG Galvanized Swaged Antenna Mast with a notch in the receiving end as to mate with the swage of another of this same item to prevent twisting. There's a Big difference between 18 AWG and 16 AWG when it comes to joining Swaged to Straight Antenna Masts. You cannot mix and match 16 and 18 gauge masts so please, verify the mast you have before purchasing a complimenting swaged section. Be Sure and afford yourself 2 feet minimum, up to 1/3 of the overall mast length between the two wall mounts you would utilize in your TV antenna Installation. The Torque applied from wind load through cantilever to these mounts can be significant.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)
This Item Ships LTL Freight ONLY.

Specification Sheet
od
1.25

ROHN Direct Embed Monopole Towers

GENERAL USE:
ROHN Direct Embed Poles minimize site requirements, lowering lease rates and acquisition costs. They are designed for rapid installation, meeting the demands of today’s dynamic communication environments. Whether you are supporting broadband, PCS, security or other lightweight systems, ROHN Tapered Steel Poles offer extremely efficient designs.

FEATURES:
• Completely hot-dip galvanized after fabrication
• Fast, easy installation
• Designed for applications with stringent deflection requirements
• Internal routing of transmission lines
• Each pole ships with the following:
    Assembly Drawings and Standard Foundation Details
    (4) 5” x 7” Ports with (2) port covers
    (3) Jacking Lugs on each side of splices
    (3) Ground attachment clips
    (1) Vented cap plate
    (1) Bearing plate welded to bottom
    Safety Climb Support Brackets
    (1) Safety warning sign
    (1) Pole ID tag
    Attachment clips for optional step bolts
• Optional items are available and may be ordered separately.
• Custom designs available for any height or application.




Per Rev G requirements, any structure greater than 10’ requires a climber safety device.