ROHN WM18D Antenna Wall Mount 18 inch Y Style Double Brackets for 1.25 to 2.75" OD Mast
ROHN
Made in the USA!
The ROHN WM18D is a Hot Dip Galvanized 14 Gauge Steel Heavy Duty Bracket Set of (2) Double "Y" Style Brackets with Anti-Twist Feature, One with a Vertical Brace Strut on the Bottom Bracket, with Hardware Included for an 18 inch Standoff Wall Support of Light to Medium Duty Antennas on Mast Poles from 5 to 10 feet long and from 1.25 to 2.75 inches in Outside Diameter for Off-air and OTA TV, UHF/VHF Radio, Remote Telemetry Control and Monitoring Stations, Cellular Date Gateways, WiFi, Wireless Internet, Receivers, Boosters and Repeaters.(Mast Not Included)
These mast mountings are typical and generally require the cantilever distance between the mounts be one quarter (1/4) to one third (1/3) of the mast length depending on Wind Load, starting from the bottom with 2 foot between brackets being a minimum distance. All Masts greater than ten feet in length, and/or 2 inches or greater in O.D. should be based upon and from the ground in rising up to the desired height.
Also for Telescopic Mast Poles comprised of 1.25", 1.50", 1.75", 2.00" and 2.25" Tubes nested together and then extended, these wall mounts can supplement structural support but are not designed to take the place of a Base in Supporting the weight of the Mast off the ground or guying. Be sure and check that the Tube segments you wish to wall mount will fit within the Outside Diameter Window specified that the Brackets will accommodate. Set screw installation may require some field drilling.
Manufacturers recommend that ALL masts above 10 feet from their uppermost support be Guyed
With more height in your installation, Grounding/Bonding is a recommended consideration.
DISH Network Approved
The DISH Network approved products list is issued by them and changes without notice. Approved Accessories are required from the Dish Antenna to the Receiver and all components used in mounting and grounding. Items developed and distributed directly from Echostar Satellite LLC are to be considered as acceptable by default. DISH Network develops this list to assure quality and longevity to your DISH Network experience.
Tested by their Labs and Approved by their Engineering Team, these parts represent high quality components that are utilized in other Installations as well. Not all parts used in DISH Network Installations are "Controlled Items" and "Custom" installations may require special materials not found on the list. A Prime example of this is RG11 cable, which is absolutely necessary for long distances between the Dish and the Receiver, but is not addressed at all by the "Approved" list. "Reasonable is as Reasonable does", if you find yourself in a particular "tight spot", ask a DISH Network Installer for advice, and then buy the materials needed from one of the same places they do!
These are the Products that appear directly on the DISH Network approved list. We have many more Products that Installers use that are not covered by any list. Feel free to browse for those items by Category directly! DISH Network in no way endorses this website or the Products carried by same that appear on their list.
