ROHN 45TDM2S3KD Satellite Dish Mount for 45G Tower Top with 2.375" OD Mast Pipe
ROHN
Made in the USA!
The ROHN 45TDM2S3KD Tower Top Dish Mount is for Mounting Satellite, Parabolic, DBS, Dish, Array or other such focused beam antenna on top of the ROHN 45G Tower and comes with a 7' x 2.0" SCH40 (2-3/8" OD) HDG Pipe. Your particular application may require use of six-way guying via a TA45G (sold separately).
Top plate includes built-in guy lugs. Bolts to the top of standard 45G tower Section. Lower plate connects with U-bolts. Set screws secure mounting pipe. Mounting Pipe Sizes are associated with these part numbers and Descriptions:
45TDM2S3KD - 2-3/8 inch O.D. x 7 Foot Pipe
45TDM25S3KD - 2-7/8 inch O.D. x 7 Foot Pipe
45TDM3S3KD - 3-1/2 inch O.D. x 7 Foot Pipe
45TDM35S3KD - 4 inch O.D. x 7 Foot Pipe
The Standard 45TDMKD accessory comes without the Pipe, you can refer to the other Model Numbers for Standard Pipe sizes as indicated. Your particular application may require use of six-way guying via a TA45G (sold separately).
This ROHN Mount Assembly is Manufactured for Mounting a Real S/C/Ku Band Fixed, Offset or Steerable Dish (EL/AZ or Polar Mount) on the Top of your ROHN 45G Tower above any Trees and Buildings that may Block your view of the Satellite Orbital Arc (Clark Belt). For Tower Mounting 1.0 meter, 1.2 meter, 1.3 meter, 1.5 meter, 1.8 meter, 2.4 meter, 2.8 meter, 3.0 meter, 3.1 meter Satellite Dishes to receive SKY, IndoSat, BBC, Free to Air, PanAmSat, ITV and other DBS Programming. Understand that the Physical characteristics of Composition (Solid vs Mesh) and Reflector Size will determine Wind Load that will influence the Height, Guying and Wind Survivability of the Dish, the ROHN 45G Tower and Structures they are mounted on. It is Suggested that Engineering (both Feasibility and Structural) precede any Potential Purchase of this Product Line for this purpose. ROHN Products, LLC nor 3 Star Inc, et al make no Engineering Representations as to the Suitability of this Product for use in conjunction with a Particular Dish/Mounting Scenario.
Download
ROHN Tower Antenna Mount and Assemblies
ROHN Tower Antennas Mounts for All Series. Select by the ROHN Tower Series and choose between Tower Top Antenna Mounts, Tower Apex Antenna Mounts, Tower Side Arm Antenna Mounts with or without Tiebacks and Tower Face Antenna Mounts. These Mounts will differ based on the Type of Antenna, the Size of the Mast Pipe, Pole or Tube it is designed to be Mounted on and the Tower Leg Size it will be Mounted to. These Mounts were Primarily Engineered for ROHN G Series to include 25G 45G 55G 65G, RTL Towers, RSL Towers and SSV Towers. As there are Other Manufacturers with Similar Engineering in Their Communications Tower Series, you would find that some of the Antenna Tower Mounts will fit other Branded Towers as well.
Sorry, we are offline,
click here to send us message
