ROHN 45TDM35S3KD Satellite Dish Mount for 45G Tower Top w/4.00" inch OD Mast Pipe
ROHN
Made in the USA!
The ROHN 45TDM35S3KD Tower Top Dish Mount is for Mounting Satellite, Parabolic, DBS, Dish, Array or other such focused beam antenna on top of the ROHN 45G Tower and comes with a 7' x 3.50" SCH40 (4.00" OD) HDG Pipe. Your particular application may require use of six-way guying via a TA45G (sold separately).
Top plate includes built-in guy lugs. Bolts to swaged top of standard 45G tower Section. Lower plate connects with U-bolts. Set screws secure mounting pipe. Mounting Pipe Sizes are associated with these part numbers and Descriptions:
45TDM2S3KD - 2-3/8 inch O.D. x 7 Foot Pipe
45TDM25S3KD - 2-7/8 inch O.D. x 7 Foot Pipe
45TDM3S3KD - 3-1/2 inch O.D. x 7 Foot Pipe
45TDM35S3KD - 4 inch O.D. x 7 Foot Pipe
The Standard 45TDMKD accessory comes without the Pipe, you can refer to the other Model Numbers for Standard Pipe sizes as indicated. Your particular application may require use of six-way guying via a TA45G (sold separately).
This ROHN Mount Assembly is Manufactured for Mounting a Real S/C/Ku Band Fixed, Offset or Steerable Dish (EL/AZ or Polar Mount) on the Top of your ROHN 45G Tower above any Trees and Buildings that may Block your view of the Satellite Orbital Arc (Clark Belt). For Tower Mounting 1.0 meter, 1.2 meter, 1.3 meter, 1.5 meter, 1.8 meter, 2.4 meter, 2.8 meter, 3.0 meter, 3.1 meter Satellite Dishes to receive SKY, IndoSat, BBC, Free to Air, PanAmSat, ITV and other DBS Programming. Understand that the Physical characteristics of Composition (Solid vs Mesh) and Reflector Size will determine Wind Load that will influence the Height, Guying and Wind Survivability of the Dish, the ROHN 45G Tower and Structures they are mounted on. It is Suggested that Engineering (both Feasibility and Structural) precede any Potential Purchase of this Product Line for this purpose. ROHN Products, LLC nor 3 Star Inc, et al make no Engineering Representations as to the Suitability of this Product for use in conjunction with a Particular Dish/Mounting Scenario.
Download
RG59 Messengered CCTV Cable for Aerial Installation
RG59 Siamese with Messenger, is the choice for CCTV installations. Make your installations easier by carrying video signal and power to your equipment. Power Wire Included
This Cable features an 18 AWG power wires sheathed to the outside of the coax.
Construction
The 95% Copper Clad Aluminum Braid protects the Video signal from external EMI and RFI. Same Solid Bare Copper (SBC) Center Conductor, but Pay less with 95% Copper Clad Aluminum Braided shield. The outside of the cable uses PVC with added UV inhibitors. for great overall performance. This wire is also messengered for easy pole to pole, building to building aerial installation.
Cable Management
This cable comes on a quality wooden 1000' spool and has convenient footage markings on the cable, making installation a snap.
