Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

ROHN 55G 10 Foot Tapered Base Tower Section for Insulator R-55TGIA

Price$1,455.00
Manufacturer Code55TGIA
Qty
AvailabilityItem Ships direct from Rohn, 3 to 4 weeks .

Highlights

Hot Dip Galvanized
Double Bolted Joints
Zig-Zag Rod Bracing
1-1/4" Steel Tubing
Side Rails
16 3/4" Equalateral
Triangular Design
Can be used in:
Guyed or
Bracketed Config.s

Bulk Quantities Available Here!

 

ROHN 55TGIA Tapered 10 Foot Tower Section for Base Insulator
11 gauge walls with six bays of bracing and Tapered for Guy or Bracketed installations. The 55TGIA is available in the standard 10 foot section length. This Base Segment was designed for use with the A4197L Base Insulator Lightning Arrestor (Available Separately). This tower uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability. Featuring a 17 inch equilateral triangular design, the 55G is constructed of extra heavy duty 1-1/2 inch steel tubing side rails with continuous solid steel rod bracing. Each 10 foot section is shipped containing all required nuts and bolts attached to one leg. The 55G tower can be used guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 400 feet. Consult ROHN Catalog Links at Footer Section below for ROHN 45G Tower Details.

 


This Item Ships LTL Freight ONLY...
Click Here for: What You Want to Know about Shipping!

Since there are various other Manufacturers of Towers and Tower accessories that copy the ROHN Tower design, if you are not sure of the manufacturer of your Tower, you can at least compare the actual measurements and design of yours to those found in the spec. sheets in the ROHN catalog section via the Link provided above to assure yourself that additional sections or parts will fit. We cannot make that determination for you as the ROHN clones are something we don't carry or otherwise represent in our Product line. All towers in the GT Series are constructed with high strength steel tubing and feature ROHN's exclusive Zig-Zag ® solid rod bracing to provide exceptional strength. All GT Series Towers are hot dip galvanized after fabrication. In this process, each section of the tower is totally immersed in molten zinc, allowing every square inch of the tower, inside and out, to be completely covered. Hot dip galvanizing protects all points of welding and construction against rust and corrosion while providing an attractive finish.

The 55G is a true multi-use structure that provides excellent strength for applications up to 400´. It´s offered with either heavy steel tube or solid steel rod legs to satisfy a wide variety of needs under varied conditions. When properly installed, the standard tower will support the loads shown on various guyed and self-supporting information sheets in the ROHN catalog.

Most Restrictions Allow for 50 feet of Height without the Necessity of Guy Wires, Anchors or Braces. However, No Tower is self supporting during construction! Always use temporary guys on the top most section, and install permanent guy wires as soon as a guy point height is reached. Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a susbstitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase. All Information regarding the ROHN 55G Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.


ROHN 55G Buyers Guide


ROHN 55G Buyers Guide


Get Adobe Reader



This Buyers Guide will answer many questions you may have on this Product Line.