ROHN 55SS035 35' foot 55G Self-Supporting Tower Complete Pre-engineered Kit
ROHN
Made in the USA!
The ROHN 55SS035 35' foot 55G Self-Supporting Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna load and Wind Speed indicated. This 55SS035 Kit is comprised of (4) 10' Tower Section(s), (1) Top Cap Plate and Grounding Package(optional), less Foundation and Installation.
This Tower Package uses 5' foot of (1) 10' foot 55G Tower Section embedded in concrete pad/pier as substitution for (1) SB55G 5' foot Base Section!
This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Self Supporting 35 Foot ROHN 55G Tower with EPA (Effective Projected Area) REV. F Ratings for 70, 80 or 90 MPH (No Ice) and REV. G Ratings for 90, 100 or 110 MPH (No Ice) 3-second Gust Wind Speeds. For more info click on the "More Info" or "Specification" Tabs above.
This Item Ships LTL Freight ONLY!
| INCLUDED MATERIALS WITH 55SS035 KIT | ||
|---|---|---|
| QUANTITY | PART NUMBER | DESCRIPTION |
| 1 | APL55G | Top Beacon Plate for 55G |
| 4 | 55G | 10' Tower Section |
| 4 | 55JBK | Bolt Kit for 55G Tower Section |
| 0 | SB55G | 5' of (1) 10' 55G Tower Section is Embedded in Concrete Pad in lieu of Base Section |
| 1 | ACWS | Anti-Climb Warning Sign |
| 1 | ASSEMBLY GUIDE | Printed Specification/Assembly Guide |
| OPTIONAL ACCESSORIES FOR 55SS035 KIT | ||
| QUANTITY | PART NUMBER | DESCRIPTION |
| 2 | BGK2G | Tower Base Grounding Kit /includes: (1) 10' of #4 Copper Wire (1) 5/8" x 8' Copper Clad Ground Rod (1) 5/8" Ground Rod Clamp (1) 1 1/4" to 2" J-Clamp (For 55G/65G Section Tubular Rail) |
Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesive of the soil to counter a Tower tip-over moment, as well as the strength of the tower members to withstand these Forces against them. ROHN Tower Kits are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or find the Tower Quote Data Sheet Form by clicking the link that appears on the Footer of this Page Below. *Per Rev G requirements, any structure greater than 10' foot requires a climber safety device.
Download
CAT5e Keystone Jack Inserts
Category 5E (Enhanced) Operates at up to 350 MHz, instead of the 100 MHz of standard CAT 5. These CAT 5E keystone inserts are fully ANSI/TIA/EIA 568 B.2-1 compliant. CAT 5e jacks are compatible with the current Category 5E Equipment, as well a Legacy and CAT 5. The Enhanced Electrical Performance of CAT 5E ensures capacity in supporting increased Bandwidth Application Requirements. Typical applications would include, Gigabit Ethernet, Distributed Video (CCTV) over CAT 5E, Voice over IP (VoIP). These CAT 5E Keystone Inserts offer Excellent Performance in all aspects of Data Transmission.
A Keystone module is an industry standard type of wall jack used in residential and business environments. The system consists of a modular face plate to which jacks are mounted. Flush mount Keystone Wallplates will fulfill the most complicated station installation requirements through a wide selection of snap-in modules. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements of voice, data, audio, video, fiber optic, etc. The inserts are a snap to install and remove, giving you a highly adaptable system.
A keystone jack module is a standardized snap-in package for mounting a variety of low-voltage electrical jacks such as TV, Phone, LAN, Data, BNC, RCA or optical connectors into a keystone wall plate, surface-mount box, or a patch panel. Keystone modules have a commonly popular standardized rectangular face of 14.5mm wide by 16.0mm high and are held in place with a flexible tab. This allows them to be snapped into or out of a mounting plate with correspondingly-sized rectangular holes, called ports. All keystones, regardless of the type of jack they carry, are interchangeable and replaceable. This is what makes Keystone a popular choice in today's installations at Home or Office. Some keystones use a pass-though type connector, where there is a jack on both the front face as well as the rear side. Others only have a jack on the front and employ a different means for hard-wiring signal cables in the rear, such as a mini 110, insulation-displacement connector, crimp or solder connection.
