ROHN DM55G2 Microwave Dish Antenna Mount with 5' foot by 2.38" OD Pipe for 55G Tower
ROHN
Made in the USA!
The ROHN DM55G2 Microwave Dish (or Other Narrow Beamwidth) Antenna Mount includes (2) Angle Iron Hot Dip Galvanized Steel Crossmembers that Bolt directly to any (1) of the (3) Faces of a 55G Tower Section. Also includes a 5 Foot by 2 inch SCH40 (2-3/8 inch OD) Pipe attached via U-bolts to the center of the Brackets, that in turn, are attached to the (2) leg rails on each side of the Tower Face via additional U-Bolts
The ROHN DM55G2 mount goes together quickly, with a minimum of bolted connections. The angle steel cross members connect directly to the tower legs with easy-to-use U-bolts. This mount is hot dip galvanized.
| DM55G2 | |||
|---|---|---|---|
| QUANTITY | PART NUMBER | DESCRIPTION | DRAWING NUMBER |
| 2 | KY1550 | Dish Mount Bracket | B881437 |
| 1 | KH275 | 2" STD x 5' Mounting Pipe | B770160 |
| 2 | KY1549 | Mounting Clip Angle | B881436 |
| 4 | 210018GA | 1/2 x 1 1/2" Bolt Assembly | C770404 |
| 8 | JR65A | 3/8" U-Bolt Assembly | B651028 |
| 4 | JR61A | 3/8" U-Bolt Assembly | B651028 |
DownloadROHN Tower Antenna Mount and Assemblies
ROHN Tower Antennas Mounts for All Series. Select by the ROHN Tower Series and choose between Tower Top Antenna Mounts, Tower Apex Antenna Mounts, Tower Side Arm Antenna Mounts with or without Tiebacks and Tower Face Antenna Mounts. These Mounts will differ based on the Type of Antenna, the Size of the Mast Pipe, Pole or Tube it is designed to be Mounted on and the Tower Leg Size it will be Mounted to. These Mounts were Primarily Engineered for ROHN G Series to include 25G 45G 55G 65G, RTL Towers, RSL Towers and SSV Towers. As there are Other Manufacturers with Similar Engineering in Their Communications Tower Series, you would find that some of the Antenna Tower Mounts will fit other Branded Towers as well.
Sorry, we are offline,
click here to send us message
