Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools

My Cart

Your shopping cart is empty!

ROHN 55G Tower Top Dish Mount R-55TDMKD

Price$1,253.00
Manufacturer Code55TDMKD
Qty
AvailabilityDirect Ship From Rohn
4 to 6 weeks
ShippingCan ship only within USA

Highlights
Hot Dip Galvanized
2 Plate accessory
Fits to 55G Main Section
 Accomodates:
2.375 to 4.500 inch Pipe DIA
(Sold Separately)

Bulk Quantities Available Here!

ROHN 55TDMKD Tower Top Dish Mount
Top plate includes built-in guy lugs. Bolts to swaged top of standard 45G tower Section. Lower plate connects with U-bolts. Set screws secure mounting pipe. Mounting Pipe Sizes are associated with these part numbers and Descriptions:

55TDM2S3KD   - 2-3/8 inch O.D. x 7 Foot Pipe
55TDM25S3KD - 2-7/8 inch O.D. x 7 Foot Pipe
55TDM3S3KD   - 3-1/2 inch O.D. x 7 Foot Pipe
55TDM35S3KD - 4 inch O.D. x 7 Foot Pipe

55TDM45S3KD - 4-1/2 inch O.D. x 7 Foot Pipe

The Standard 55TDMKD accessory comes without the Pipe, you can refer to the other Model Numbers for Standard Pipe sizes as indicated. Your particular application may require use of six-way guying via a TA55G (sold separately).

spec. sheet



Spec. Sheet


Get Adobe Reader




ROHN 55TDMKD is Manufactured for Mounting a Real S/C/Ku Band Fixed, Offset or Steerable Dish (EL/AZ or Polar Mount) on the Top of your ROHN 55G Tower above any Trees and Buildings that may Block your view of the Satellite Orbital Arc (Clark Belt). For Tower Mounting 1.0 meter, 1.2 meter, 1.3 meter, 1.5 meter, 1.8 meter, 2.4 meter, 2.8 meter, 3.0 meter, 3.1 meter Satellite Dishes to receive SKY, IndoSat, BBC, Free to Air, Panamsat, ITV and other DBS Programming. Understand that the Physical characteristics of Composition (Solid vs Mesh) and Reflector Size will determine Wind Load that will influence the Height, Guying and Wind Survivability of the Dish, the ROHN 25G Tower and Structures they are mounted on. It is Suggested that Engineering (both Feasibility and Structural) precede any Potential Purchase of this Product Line for this purpose. ROHN Products, LLC nor 3 Star Inc, et al make no Engineering Representations as to the Suitability of this Product for use in conjuction with a Particular Dish/Mounting Scenario.
Rate this product.
Product isn't rated yet. Write a review.


Products   Recently Viewed